An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
Search Results "Raised Diving Board"
-
11B-203.11 Water slides
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
Footrests and Armrests: ADA Standard Section 1009.2.6
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
Seat Location: ADA Standard Section 1009.2.2
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
902 Dining Surfaces and Work Surfaces
Commenters expressed concern about use of the terms "dining surfaces" and "work surfaces" and urged the Board to include definitions of the terms in the final rule....
-
Detectable Warnings
The original ADAAG contained a requirement that curb ramp surfaces have a raised distinctive pattern of truncated domes to serve as a warning detectable by cane or underfoot to alert people...
-
E.2. - Where an agency uses a best value "trade-off" source selection process, may it trade off applicable technical provisions of the Access Board’s standards where an offer provides strong technical merit, strong past performance, or a lower price?
The Access Board’s technical provisions are mandatory requirements that must be met (directly or through equivalent facilitation) unless (a) the product or service (if it is a commercial...
-
Accessible Routes to Press Boxes
In the final rule, the Board has addressed the concerns raised in many technical inquiries by providing an exception for press boxes at 206.2.7....
-
Prescription Drug Container Labels: ADA Standard Section 10.
Review the updated information on the revisions to the ADA Standards regarding prescription drug container labels.
-
Public Rights-of-Way: ADA Standard Section 1.
Public Rights-of-Way Guidelines are still under study by the Access Board, DOJ and DOT....
-
M305.3.1 Length (Section-by-Section Analysis)
In the MDE NPRM, the Access Board proposed a gripping surface length of four inches minimum for horizontal standing supports. No public comments were submitted on this requirement....
-
Character Specifications
Distinctions based on the cross section may be difficult to distinguish and enforce with respect to characters that are raised 1/32 inch, according to commenters....
-
1.2 Background
The tactile properties of detectable warning surfaces result from a grid pattern of raised, flat-topped, truncated domes that can be felt underfoot or detected by a long cane or a wheelchair...
-
Kompan, Inc. KPL202 - Simplicity Bench
The wooden boards are of impregnated pine wood or hardwood. Product number: KPL202 Category: Playground Accessories Product line: MOMENTS Age group: 3+ Years...
-
Kompan, Inc. KPL201 Pine Bench
The wooden boards are of impregnated pine wood or hardwood....
-
11B-411.2.3.2 Car designation signs
Signs shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
11B-411.2.3.2 Car designation signs
Signs shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply. Exception: Reserved....
-
III-7.5185 Automated teller machines
This can include Braille and raised letters and/or audio handsets, along with tactile keys....
-
11B-411.2.3.1 Floor designation signs
Signs shall be provided in both raised characters and Braille. Raised characters shall be 2 inches (51 mm) high....
