For vertical supports, the MDE NPRM proposed that the bottom end of the support be 34 inches high minimum and 37 inches high maximum above the standing surface....
Search Results "High-Contrast Captioning"
-
M305.3.2 Height (Section-by-Section Analysis)
-
Vertical Clearance [§307.4]
Vertical Clearance [§307.4] Headroom clearance of at least 80” high is required along all circulation paths (except at doors and doorways where a 78” minimum clearance is permitted to...
-
ADA Requirements - Testing Accommodations
Department of Justice Civil Rights Division Disability Rights Section Testing Accommodations Standardized examinations and other high-stakes tests are gateways to educational...
-
Standards that measure needed physical or mental ability to perform a job
However, if a position in a mailroom required as a qualification standard that the person in the job be able to reach high enough to place and retrieve packages from 6-foot high shelves,...
-
COSTS TO LOWER MINIMUM TABLE HEIGHT
COSTS TO LOWER MINIMUM TABLE HEIGHT To be useful for its intended purpose, examination tables and chairs must maintain a high height of at least 32 inches, so that the health care provider...
-
National Network of ADA Centers
In Section 5.1, pages 66 and 69, justifications for a higher transfer height is made at 25” and chapter 6 (page 139) a more clear discloser is given for a high height number and the exclusion...
-
A4.19.6 Mirrors
If mirrors are to be used by both ambulatory people and wheelchair users, then they must be at least 74 in (1880 mm) high at their topmost edge....
-
A4.19.6 MIRRORS
If mirrors are to be used by both ambulatory people and wheelchair users, then they must be at least 74 in (1880 mm) high at their topmost edge....
-
Plantronics Clarity Ensemble TTY Phone
Requires the Registered User plan or above. Login! -
11B-218.2 New and altered fixed guideway stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with Sections 11B-810.5 through 11B-810.10...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
4.32.3 Knee Clearances
If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see Fig....
-
308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1220 mm) maximum and the low forward reach shall be 15 inches (380 mm) minimum above the finish floor or...
-
11B-308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1219 mm) maximum and the low forward reach shall be 15 inches (381 mm) minimum above the finish floor or...
-
11B-308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1219 mm) maximum and the low forward reach shall be 15 inches (381 mm) minimum above the finish floor or...
-
H8
If lavatories are provided, does at least one have at least a 29 inch high clearance under the front apron with the top of the rim no more than 34 inches above the floor?...
-
§ 37.42(e)(1)
(1) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet...
-
A4.13.11(3) Application of force
In high-rise buildings, air-pressure differentials may require a modification of this specification in order to meet the functional intent....
-
4.8.7 Edge Protection
Curbs shall be a minimum of 2 in (50 mm) high (see Fig. 17)....
-
4.8.7 EDGE PROTECTION
Curbs shall be a minimum of 2 in (50 mm) high (see Fig. 17)....
-
A4.13.11(3) Application of force
In high-rise buildings, air-pressure differentials may require a modification of this specification in order to meet the functional intent....
-
§ 37.42(e)(1)
(1) Except as provided in paragraph (e)(2) of this paragraph, any obstructions on a platform (mini-high platforms, stairwells, elevator shafts, seats etc.) shall be set at least six feet...
-
Providing Auxiliary Aids and Services
organizers may need to provide auxiliary aids and services, which may include for example: (for people who are deaf or have hearing loss) qualified interpreters, notetakers, realtime captioning...
