4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
Search Results "Exit Route"
-
4.30.6 Mounting Location and Height
-
A4.30 Signage
[See subsections ...]
-
4.1.3(16) Building Signage
(16) Building Signage:
-
4.30 Signage
[See subsections ...]
-
4.30.1* General
Signage required to be accessible by 4.1 shall comply with the applicable provisions of 4.30.
-
Signage [4.30]
Signage [4.30] The Society for Environmental Graphic Design (SEGD) has prepared guidance in applying ADAAG signage requirements based on certain industry conventions. This...
-
SIGNAGE
[See subsections ...]
-
F216 Signs
[See subsections ...]
-
703 Signs
[See subsections ...]
-
4.30.1* GENERAL
Signage required to be accessible by 4.1 shall comply with 4.30.
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor.
-
4.30 SIGNAGE
[See subsections ...]
-
A.4.30 SIGNAGE
[See subsections ...]
-
Common Questions (New Construction)
Common Questions
-
11B-216 Signs.
[See subsections ...]
-
Signage
Error/Omission: Where permanent room identification signage is provided, it is mounted in the wrong location. Result: People who are blind or visually impaired are trained...
-
11B-703 Signs
11B-703 Signs.
-
11B-703.4.1 Height above finish floor or ground
11B-703.4.1 Height above finish floor or ground. Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the...
-
11B-216 Signs
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
11B-703 Signs
[See subsections ...]
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
4.1.7(3)(d)
(d) Accessible routes from an accessible entrance to all publicly used spaces on at least the level of the accessible entrance shall be provided....
-
4.6.6 VERTICAL CLEARANCE
Provide minimum vertical clearances of 114 in at accessible passenger loading zones and along vehicle access routes to such areas from site entrances....