Section 407.4.6.1 covers the current ADA Standards for the location of elevator car controls.
Search Results "Existing Trail"
-
Location: ADA Standard Section 407.4.6.1
-
11B-407.4.6.1 Location
In existing elevators, car control buttons with floor designations shall be permitted to be located 54 inches (1372 mm) maximum above the finish floor when a parallel approach is provided...
-
11B-608.7 Thresholds
Exception: A threshold 2 inches (51 mm) high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a ½ inch (12.7 mm) high threshold would...
-
11B-608.7 Thresholds
Exception: A threshold 2 inches (51 mm) high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a ½ inch (12.7 mm) high threshold would...
-
12182(b)(2)(A)(iv)
(iv) a failure to remove architectural barriers, and communication barriers that are structural in nature, in existing facilities, and transportation barriers in existing vehicles and rail...
-
302.4 Without Hearing (Section-by-Section Analysis)
This provision would clarify the requirements in existing 508 Standards §1194.31(c) and existing 255 Guidelines §1193.41(d) by specifying that provision of a mode of operation without hearing...
-
R202.1 General
Alterations and elements added to existing facilities shall comply with R202....
-
407.2.1.1 Height
EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of the highest operable...
-
11B-404.2.10 Door and gate surfaces
Existing doors and gates without smooth surfaces within 10 inches (255 mm) of the finish floor or ground shall not be required to provide smooth surfaces complying with 404.2.10 provided...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-404.2.10 Door and gate surfaces
Existing doors and gates without smooth surfaces within 10 inches (255 mm) of the finish floor or ground shall not be required to provide smooth surfaces complying with 404.2.10 provided...
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
Technically Infeasible
With respect to an alteration of a building or a facility, something that has little likelihood of being accomplished because existing structural conditions would require removing or altering...
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
-
Elkay Filtered EZH2O® Bottle Filling Station Retro Fit Kit LMABFWS-RF
Designed to retrofit existing 115V pushbar-activated EMABF style water coolers - includes new basin and drain Bottle Filler features sanitary no-touch sensor activation with automatic...
-
Allied Industries International, Inc. Eco-Grip® Slip Resistant Safety Flooring
It can be installed over existing flooring and is cost effective when compared with other flooring products. Commercial flooring never had it so good....
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
407.1 General (Section-by-Section Analysis)
This section is consistent with requirements in existing 508 Standards §§ 1194.21 and 1194.25, along with § 1193.41(f) of the existing 255 Guidelines....
-
302.6 Without Speech (Section-by-Section Analysis)
302.6 Without Speech (Section-by-Section Analysis) This proposed section would clarify the requirements in existing 508 Standards §1194.31(e) and existing 255 Guidelines §1193.41(h) by...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
Technically Infeasible
With respect to an alteration of a building or a facility, something that has little likelihood of being accomplished because existing structural conditions would require removing or altering...
-
Saunas and steam rooms. (Section-by-Section Analysis)
The Department considered these comments and has decided to eliminate the exemption for existing saunas and steam rooms that seat only two people....
-
Table of Contents
Children F103 Modifications and Waivers F104 Conventions F105 Referenced Standards F106 Definitions ABA CHAPTER 2: SCOPING REQUIREMENTS F201 Application F202 Existing...
