11B-705 Detectable warnings and detectable directional texture. [2010 ADAS] 705 Detectable Warnings...
Search Results "Warning Curb"
Commonly Searched Documents
-
11B-705 Detectable warnings and detectable directional texture
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-705 Detectable warnings and detectable directional texture
11B-705 Detectable warnings and detectable directional texture [2010 ADA Standards] 705 Detectable Warnings...
-
11B-247.1.2.7 Track crossings
Where it is necessary to cross tracks to reach transit boarding platforms, detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.7 shall be provided....
-
11B-705.1.2.6 Reflecting pools
When detectable warnings are provided at reflecting pools, it shall be 24 inches (610 mm) minimum and 36 inches (914 mm) maximum in width....
-
4.29.3 Detectable Warnings on Doors To Hazardous Areas
4.29.3 Detectable Warnings on Doors To Hazardous Areas. (Reserved)....
-
1009.12 Alarms/emergency warning systems/accessibility
Required emergency warning systems shall activate a means of warning the hearing impaired....
-
11B-1005.3.1 Curb or barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
106.5.24 Detectable Warning
A standardized surface feature built in or applied to walking surfaces or other elements to warn of hazards on a circulation path....
-
11B-406.5.3 Landings
[2010 ADA Standards] EXCEPTION: In alterations, where there is no landing at the top of curb ramps, curb ramp flares shall be provided and shall not be steeper than 1:12. ...
-
Dome Spacing: ADA Standard Section 705.1.2
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Dome Size: ADA Standard Section 705.1.1
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (23 mm) minimum and 1.4 inches (36 mm) maximum, a top diameter of 50 percent of the base diameter minimum...
-
Curbs [4.21.7]
Curbs [4.21.7] Curbs are limited to ½ inch (measured from the room floor and the shower floor) so as not to interfere with entry to the shower....
-
2.11 Perceived Color of Detectable Warnings
The ability of people with visual impairments to correctly recognize the color of detectable warnings has important implications for both conspicuity and the potential for detectable warning...
-
4.29.4 Detectable Warnings at Stairs
4.29.4 Detectable Warnings at Stairs. (Reserved)....
-
11B-406.6 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
-
Detectable Warnings at Stairs [4.9.5]
A requirement for detectable warnings has not been specified because of lack of data regarding effectiveness....
- SafetyStepTD Traditional Detectable Warning System
-
4.21.7 Curbs
4.21.7 Curbs. All of the designs reviewed were curbless, roll-in showers....
-
Diagonal Curb Ramps [§406.6]
Diagonal Curb Ramps [§406.6] If curb ramps are placed diagonally at an intersection, it is important that clear space 48” long min. is available at the bottom that is outside active...
-
Curb Ramps [§406]
Curb Ramps [§406] Requirements for curb ramps apply to ramps that cut through curbs or are built up to them....
-
Detectable Warnings
Rail platform requirements include specifications for detectable warnings along platform boarding edges not protected by screens or guards (810.5.2)....
-
Sec.36.407 Temporary suspension of certain detectable warning requirements
Sec.36.407 Temporary suspension of certain detectable warning requirements....
-
Curb Ramps [4.7]
Curb ramps complying with 4.7 are required wherever an accessible route crosses a curb....