The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
Search Results "Tread Surface"
Filters
Commonly Searched Documents
-
504.5 Nosings
-
Surfaces
An accessible surface is firm and stable. Use caution with the size and depth of gravel when maintaining unpaved surfaces....
-
Dining Surfaces and Work Surfaces for Children's Use: ADA Standard Section 902.4
Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4....
-
Walking Surfaces: ADA Standard Section 403
Section 403 covers the current ADA Standards for walking surfaces that are part of an accessible route.
-
Floor or Ground Surfaces: ADA Standard Section 305.2
Section 305.2 covers the current ADA Standards for floor or ground surfaces of clear floor or ground space.
-
11B-404.2.4.4 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall comply with Section 11B-302....
-
1017.4 Passing Spaces
This section requires passing spaces to be provided at intervals of 1000 feet maximum where the clear tread width of trails is less than 60 inches....
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4....
-
Floor Surfaces: ADA Standard Section 410.2
Section 410.2 covers the current ADA Standards for floor surfaces in platform lifts.
-
11B-403 Walking surfaces
[See subsections ...]
-
11B-505.6 Gripping surface
The bottoms of handrail gripping surfaces shall not be obstructed for more than 20 percent of their length....
-
Wooster Products Flexmaster Safety Tread
Inexpensive Easily replaceable Color coordinated surfaces available ADA approved Durable safety surface Glow-in-the-dark capability Longwearing, newly designed, heat treated...
-
Treads and Risers [4.9.2], Nosings [4.9.3]
Treads must be at least 11 inches wide and uniform....
-
Dining Surfaces and Work Surfaces: ADA Standard Section 902
[See subsections ...]
-
Dining Surfaces and Work Surfaces: ADA Standard Section 226
Section 226 covers scoping requirements in the current ADA Standards for dining surfaces and work surfaces.
-
4.9.3 Nosings
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
4.9.3 NOSINGS
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
American Safety Tread Co., Inc. Stair Nosing Style 950
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
American Safety Tread Co., Inc. Stair Nosing Style 850
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
7.4.4.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with ABAAS section 304.3.2 shall be provided. ...
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
Supergrit Safety Treads
to 12'-0" (3.66 m) max. in one piece Non-combustible High content of aluminum oxide abrasive 12 standard colors Colors extend throughout filler Protective tape available TREADS...
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]
