Efforts to make products accessible should not be limited to adherence to these guidelines....
Search Results "Should"
-
Introduction to Guidelines
-
11B-410.7 Landing size
ETA Editor's Note There are no requirements for landing size in 2010 ADA Standards, although the door maneuvering clearance requirements at 404.2.4 should be applicable outside the platform...
-
11B-410.7 Landing size
ETA Editor's Note There are no requirements for landing size in 2010 ADA Standards, although the door maneuvering clearance requirements at 404.2.4 should be applicable outside the platform...
-
C. General Complaint Resolution Tips
In addition, you should treat passengers in a manner consistent with good customer service policy....
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
Suggestions by Jean Tessmer
The line of measurement should be parallel to the long edge of the ramp....
-
Arriving At the Hotel
Your shuttle bus drivers should be trained to offer assistance to people who are blind or who have low vision....
-
D. Notice Requirements
If so, how should such a requirement be structured?...
-
11B-703.2 Raised characters
Signs that are designed to be read by touch should not have sharp or abrasive edges. ◼...
-
11B-703.2 Raised characters
Signs that are designed to be read by touch should not have sharp or abrasive edges. ◼...
-
Cassette Recordings (Advisory Guidance)
The reader should be proficient in the language being recorded. b. The reader should be familiar with the subject....
-
Is Identification of Which Means of Egress Are Available/Closest Necessary?
However, the ability of a person with a cognitive disability to find and use the exits should be verified....
-
Behavioral Safety Products #GB350 Suicide Resistant Safety Grab Bar with Full Closure Plate
Mounting should be accommodated to solid blocking in the walls....
-
6. RECEIVERS AND COUPLERS: RECOMMENDATIONS
• All receivers should include "low battery" warning lights, to give adequate battery life warning....
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or equal to 24 inches....
-
II. Plan Implementation
After the final evacuation plan is written, a copy should be distributed to all employees and key personnel....
-
Labeling
Labeling Text on exhibits, maps, waysides, models, etc. should be simple and clean. Braille should be used sparingly for titles or labels and follow Braille standards....
-
22. Navigating an Incline, or Around Obstacles
., a driveway or sidewalk) with the passenger's wheeled device should generally be granted....
-
22. Navigating an Incline, or Around Obstacles
., a driveway or sidewalk) with the passenger's wheeled device should generally be granted....
-
A. Coverage issues
Should a different compliance schedule be implemented for small businesses? If so, why? What should that schedule require? Question 2....
-
Kompan, Inc. M143 - Albatross Seesaw
Unlike a traditional seesaw, the Albatross is engineered without the sudden drops that can occur should a child fall or jump suddenly out of one seat while the other is still occupied....
-
Accessibility of Job Information
Accessibility of Job Information Information about job openings should be accessible to people with different disabilities....
-
Surprise Drills
The emergency plan should include conducting surprise drills two or three times a year, at different times of the day and different shifts....
-
Q12: Should school districts conduct FAPE evaluations as described in the Section 504 regulation for students who, prior to the Amendments Act, had health problems but might not have been considered persons with a disability?
A: The answer depends upon whether, because of the health problem, that student has a disability and, because of that disability, needs, or is believed to need, special education or...
