Swinging doors and gates shall have maneuvering clearances complying with Table 11B-404.2.4.1....
Search Results "Power Assisted Door"
Filters
Commonly Searched Documents
-
11B-404.2.4.1 Swinging doors and gates
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
Doors: ADA Standard Section 604.8.2.2
Section 604.8.2.2 covers the current ADA Standards for ambulatory accessible compartment doors.
-
Doors: ADA Standard Section 604.8.1.2
Section 604.8.1.2 covers the current ADA Standards for wheelchair accessible compartment doors.
-
Horton Automatics EasyAccess® Series 7100 for ADA Low Energy Applications
Requires the Premium User plan or above. (Login or upgrade your account!) -
Elevator Doors: ADA Standard Section 409.3
Section 409.3 covers the current ADA Standards for the doors of private residence elevators.
-
Operation: ADA Standard Section 407.3.2
Section 407.3.2 covers the current ADA Standards for elevator door operations.
-
L. Availability of Electrical Power
Availability of Electrical Power Emergency shelters should have a way to provide a back-up power supply when the electrical service is interrupted....
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
11B-407.3 Elevator door requirements
Hoistway and car doors shall comply with Section 11B-407.3....
-
11B-604.8.1.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404 except that if the approach is from the push side of the compartment door, clearance between the door...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
Mockett PCS54WC Recessed Power/Data Grommet Demonstration
Mockett PCS54WC Recessed Power/Data Grommet Demonstration...
-
Norton 6000 Series Low Energy Operator
Designed with the user in mind, this operator features simple to use electronics, an onboard power supply and easy integration into access control systems....
-
Definition of "other power-driven mobility device.''
Definition of ‘‘other power-driven mobility device.''...
-
§382.3 Battery-powered mobility aid
Battery-powered mobility aid means an assistive device that is used by individuals with mobility impairments such a wheelchair, a scooter, or a Segway when it is used as a mobility device...
-
Doors, Doorways, and Gates: ADA Standard Section 206.5
Section 206.5 covers scoping requirements in the most current ADA Standards for accessible routes to doors, doorways, and gates.
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
Doors in Series and Gates in Series: ADA Standard Section 404.2.6
Section 404.2.6 covers the current ADA Standards for doors in series and gates in series.
-
Tips for Assisting People Who Have Mobility Disabilities
Tips for Assisting People Who Have Mobility Disabilities Communication If a person uses a term to describe a mobility disability that you are not familiar with or that you don...
-
11B-206.5 Doors, doorways, and gates
Doors, doorways, and gates providing user passage shall be provided in accordance with Section 11B-206.5....
-
11B-404.2.6 Doors in series and gates in series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1219 mm) minimum plus the width of doors or gates swinging into the space....
