A zero figure means that at the same gain control setting, the high frequency average gain in the microphone position was equal to that obtained in the telecoil position....
Search Results "Frequency"
-
2.1.4 Issues
-
4.10.13* Car Position Indicators
The audible signal shall be no less than 20 decibels with a frequency no higher than 1500 Hz....
-
2.1.3 Receivers
functioning telecoil (see issues below), wearers have the advantage of being able to utilize their own hearing aids that, presumably, provide an appropriate and individualized amplified frequency...
-
4.10.13* CAR POSITION INDICATORS
The audible signal shall be no less than 20 decibels with a frequency no higher than 1500 Hz....
-
Paragraph (f) Prevention of visually induced seizures (Section-by-Section Analysis)
Trace presented data to indicate that a range of frequencies should be excluded between 2 Hz and 70 Hz. Response....
-
6.1 Universal Receiver: Recommendations
We have already recommended, above, that venues note the transmitting frequencies of the ALS on their signage....
-
Car Position Indicators [§407.4.8]
Frequency: 300 – 3,000 Hz for verbal annunciator, 1500 Hz max. for non-verbal signal Signal level: 10 dB min. above ambient to 80 dB max....
-
Wikk AccessAbility ™ “Long Ranger” 868 Mhz Transmitters and Receivers
The Long Ranger transmitter provides security with its advanced secure rolling code technology (Frequency Hopping Spread Spectrum) that prevents any interference from any other transmitters...
-
2. BACKGROUND
BACKGROUND Three types of ALS are in widespread use at the present time: Induction Loop (IL) systems, Frequency Modulated (FM) radio systems, and Infrared (IR) systems....
-
Accessible Surfaces Located In The Use Zone
The frequency of maintenance and inspection of resilient surfacing depends on the amount of use and the type of surfacing installed....
-
Sennheiser RI 150 Stethophone Receiver
Stethophone receiver for single channel 2.3 MHz system, with BA151 (1.6 oz) Features Wideband stethoset receiver Extremely reliable transmission due to new carrier frequency...
-
E102.8 TIA (Section-by-Section Analysis)
E102.8 TIA (Section-by-Section Analysis) TIA 825-A (2003), A Frequency Shift Keyed Modem for Use on the Public Switched Telephone Network, would be incorporated by reference at 410.6.3.1...
-
4.28.3* VISUAL ALARMS
The flashing frequency of visual alarm devices shall be less than 5 Hz....
-
Honeywell SpectrAlert Advance Selectable Output Devices
Features Standard and Low Frequency models available Plug-in design with minimal intrusion into backbox Tamper-resistance construction Field-selectable candela settings on wall...
-
§1607.9 No assumption of validity.
Specifically ruled out are: assumptions of validity based on a procedure's name or descriptive labels; all forms of promotional literature; data bearing on the frequency of a procedure's...
-
11B-411.2.2.2 Verbal identification
The verbal annunciator shall have a frequency of 300 Hz minimum and 3000 Hz maximum....
-
Limitations
Each one is very different in terms of design, frequency of use, the combination of playground equipment, surface materials, soil characteristics, site conditions, weather and climate....
-
11B-411.2.2.2 Verbal identification
The verbal annunciator shall have a frequency of 300 Hz minimum and 3000 Hz maximum....
-
11B-411.2.2.2 Verbal identification
The verbal annunciator shall have a frequency of 300 Hz minimum and 3000 Hz maximum....
-
Wikk Industries Inc. RFID Hand-Free transimitter/With Switch and Bollard Transmitter
Receiver: 2 channel receiver at 1 channel price Dual Frequency and Power Compatibility: Handles 300/310MHz (Multi-Code and Linear compatible) (Frequency recognition by jumper setting...
-
4.2. Sensitivity Analysis
Accessibility baselines; Alternate Medium Accessibility baseline; Alternate captioning and audio description device replacement rates; Increased staff training frequency...
-
Roughness Measurement
(Yamanaka, 2006) The recording frequency of the laser and encoder were not set, but were recorded at approximately 1200 Hz, which resulted in an accuracy of less than 1mm when it was traveling...
-
IV. Discussion of Findings and Implications
Even within 12 months of installation, each type of surface had some type of issue or series of issues that affected the product’s performance and contribute to the necessity and frequency...
-
2.1.2 Standards
The International Electrotechnical Commission (IEC) has developed pertinent standards for "Magnetic field strength in audio-frequency induction loops for hearing aid purposes" (IEC, 118‒...
