Transitions® Angled Entry Plate – A portable stand-alone threshold plate with a slip-resistant surface which offers superior traction in varying conditions....
Search Results "Ramp Surface"
Filters
Commonly Searched Documents
-
EZ-ACCESS Transitions® Angled Entry Plate
-
302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than 1/2 inch (13 mm) diameter except as allowed in 407.4.3, 409.4.3, 410.4, 810.5.3 and 810.10....
-
Rotational Penetrometer
A wheelchair caster placed on a spring loaded caliber in a metal tripod frame which suspends the caster about 6 inches over the surface. ...
-
General (R304.1) (Section-by-Section Analysis)
General (R304.1) (Section-by-Section Analysis) Curb ramps are ramps that are cut through or built up to the curb (see R105.5)....
-
d-vi
Does the ramp have a level landing that is at least 60 inches long at the top and bottom of each ramp section or where the ramp changes direction?...
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
4.19.4 EXPOSED PIPES AND SURFACES
There shall be no sharp or abrasive surfaces under lavatories....
-
Re: When is a Curb Ramp a Ramp?
I leave it up to the AHJ to define curb heights in order to apply them to the definition of a curb ramp. Most of the time that provides a max height of 7". ...
-
Findings
The following are the predominant findings from this study: No single type of surface material/system was found to be the most accessible surface or better than others when comparing...
-
4.19.4 Exposed Pipes and Surfaces
There shall be no sharp or abrasive surfaces under lavatories....
-
Dimensions for Adults and Children: ADA Standard Section 102
Section 102 of the ADA Standards covers information on the dimensions for adults and children.
-
11B-102 Dimensions for adults and children
this chapter includes technical requirements based on children’s dimensions and anthropometrics for drinking fountains, water closets, toilet compartments, lavatories and sinks, dining surfaces...
-
11B-405.7.4 Change in direction
ramp run. ...
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable....
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable....
-
High work surface
All of the seating spaces/work surfaces were approximately 42" high....
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
§ 38.83(c)(6)(i) Requirement
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
-
Conclusions
All the surfaces pass the existing specifications for impact attenuation of playground surfaces. 2....
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
Tread Obstacles [1017.5]
A tread obstacle is anything that interrupts the evenness of the tread surface....
-
Non Slip Safety Solutions
The end result is a floor surface engineered for lasting beauty and trouble-free maintenance....
-
T402.7 Edge Guards
Ramps and bridgeplates shall provide edge guards continuously along each side of the ramp or bridgeplate to within 3 inches (75 mm) of the end of the ramp or bridgeplate that is deployed...
