Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
Search Results "Raised Crossing"
Commonly Searched Documents
-
11B-407.4.6.2.1 Size and shape
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
- American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
- Cybex Total Access Arc Trainer
-
Sec.36.304(c)(2)
These measures include, for example, adjusting the layout of display racks, rearranging tables, providing Brailled and raised character signage, widening doors, providing visual alarms,...
-
§ 36.304(c)(2)
These measures include, for example, adjusting the layout of display racks, rearranging tables, providing Brailled and raised character signage, widening doors, providing visual alarms,...
-
Hall Call Buttons [4.10.3]
Recommendation: Buttons that are raised from the faceplate (or trim ring or ferrule) are preferred because they can be activated by other parts of the hand, not just the finger tip....
-
7 [§ 4.7.8]
If the curb ramp you are surveying is along a public right-of-way or at a pedestrian crossing, vehicles should be prohibited from parking directly in front of the curb ramp on the street...
-
Signage
If Braille and raised letter signs are mounted on doors instead of walls, blind persons and persons with low vision may be hurt by someone who is pushing a door open while they are trying...
-
203 General Exceptions
Certain spaces are generally exempt from the guidelines, including construction sites (203.2), raised areas (203.3), limited access spaces (203.4), machinery spaces (203.5), single occupant...
-
Section 36.405 Alterations: Historic Preservation
Because those cross-references to the 1991 Standards are no longer applicable, it is necessary in this final rule to provide new regulatory text....
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The only change in the final rule was to update the cross reference to applicable transfer surfaces to accommodate the changes made to transfer surfaces, described above in Section IV.B.1...
-
R304.3.1 Turning Space
The 1.5 m (5.0 ft) dimension shall be provided in the direction of the pedestrian street crossing....
-
Extensions
Extensions are not required in alterations if they project into cross circulation paths. Extensions must be rounded or returned to the walls, floors, or posts....
-
Suggestions by Jean Tessmer
For cross slopes, measurements should be taken every 6 feet....
-
A4. Vertical Clearance
[ADA Stds 4.6.5] If No: Can the route be cleared by removing or raising low objects or can each van accessible parking space be relocated? Yes _____ No _____...
-
Labeling
The use of raised letters for titles and labels should use a consistent simple serif font for ease of reading....
-
Triax 2000
A large tripod that can be raised to a fall height above the highest play surface on a playground. ...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
INFORMATION REQUIREMENTS OF PEDESTRIANS WITH VISION DISABILITIES
Previous research has shown that at many roundabout crossings a substantial number of drivers fail to yield to apparently blind pedestrians (4) (5)....
-
11B-406.5.3 Landings
Section 11B-403.5.1, Exception 3, requires walks and sidewalks to be 48” wide minimum; Section 11B-403.3 requires walks and sidewalks to have a cross-slope of 1:48 or less....
-
III-7.4300 Parking
Accessible parking spaces and the required accessible route should be located where individuals with disabilities do not have to cross vehicular lanes or pass behind parked vehicles to have...
-
§382.57(c)(6)(i) Input controls
Where provided, key surfaces not on active areas of display screens, must be raised above surrounding surfaces....
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 _|Signs; Raised Characters|_ and shall be placed in uniform locations...