In facilities served by destination-oriented elevator systems, floor designations shall be numeric characters only....
Search Results "Lavatory Clear Floor Space"
-
11B-411.1.1 Floor designations
-
11B-302 Floor or ground surfaces
[See subsections ...]
-
11B-302 Floor or ground surfaces
[See subsections ...]
-
Zurn Industries Floor Access Cover
Features and Benefits: Floor access cover Bronze or nickel bronze body, and scoriated cover For use in deck areas...
-
11B-411.2.3.1 Floor designation signs
Floor designation signs complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances....
-
11B-411.2.3.1 Floor designation signs
Floor designation signs complying with Sections 11B-703.2 and 11B-703.4.1 shall be provided on both jambs of elevator hoistway entrances....
-
Turning Space: ADA Standard Section 807.2.1
Turning space complying with 304 shall be provided within the cell....
-
Turning Space: ADA Standard Section 806.2.6
Turning space complying with 304 shall be provided within the guest room....
-
Visitability
— The three essential features are one entrance with zero steps; 32 inches or more of clear passage space through interior doors, including bathrooms; and at least a half bathroom on...
-
3. FIXTURES and HARDWARE
When provided, a fold-down shelf shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the floor.”xx Shelves: “If the clear floor space allows a parallel...
-
Floor and Ground Surfaces
This guide explains requirements in the ADA Standards for floor and ground surfaces. ...
-
PEMKO 2" Floor Plates/Safety Treads No. 190
About Floor Plates/Safety Treads Pemko can fabricate almost any floor plate threshold you might require....
-
PEMKO 2" Floor Plates/Safety Treads No. E197
About Floor Plates/Safety Treads Pemko can fabricate almost any floor plate threshold you might require....
-
PEMKO 2" Floor Plates/Safety Treads No. 190B
About Floor Plates/Safety Treads Pemko can fabricate almost any floor plate threshold you might require....
-
Stanley FBB 248 Standard Weight Ball Bearing “Swing Clear” Full Mortise Offset Door Hinge
FBB248 and STSFBB248 for full mortise application on square edge doors Specify FBB258 and STSFBB258 for full mortise application on bevel edge doors Designed to swing doors completely clear...
-
General: ADA Standard Section 304.1
Section 304.1 of the ADA Standards covers information in the current ADA Standards for turning space.
-
Maneuvering Space, Adjustable Cabinetry, Fixtures and Plumbing
The Committee intends that such space be usable by handicapped persons, but this does not necessarily require that a turning radius be provided in every situation....
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
Figure 407.4.1(b) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(e) Elevator Car Dimensions – Drawing from the U.S. Access Board
