In addition, in hotels, of 50 or more sleeping rooms or suites, additional accessible sleeping rooms or suites that include a roll-in shower shall also be provided in conformance with the...
Search Results "Folding Shower Seat"
-
9.1.2 Accessible Units, Sleeping Rooms, and Suites
-
T212.1 General
Non-rail vehicles shall provide seat belts and shoulder belts complying with T605 at each wheelchair space....
-
6.8
6.8 All wheelchair spaces and companion seats must provide an unobstructed view to the screen, as defined in § 1.17 of this Consent Order....
-
ACO Linear QuARTz Drain Promotional Video
ACO Linear QuARTz Drain Promotional Video
-
(2) Transfer Surface Location for Diagnostic Equipment Used in the Seated Position
Commenters also raised concerns with the provisions in the MDE NPRM related to transferring to medical diagnostic equipment used by patients in the seated position....
-
§ 36.302(f)(2) Availability
Tickets for accessible seating shall be made available during all stages of ticket sales, including, but not limited to, presales, promotions, lotteries, waitlists, and general sales....
-
Technical Memorandum TM 2013-10 Clustered Toilet Rooms
Access Board, TAS 213.2, Exception 4 does not apply to multiple single user bathing or shower rooms; therefore, this Exception is applicable only to multiple single user toilet rooms clustered...
-
CHAPTER 9: BUILT-IN ELEMENTS
[See subsections ...]
-
DIVISION 9: BUILT-IN ELEMENTS
[See subsections ...]
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the...
-
DIVISION 9: BUILT-IN ELEMENTS
[See subsections ...]
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
M303.4.1 Breast Platforms
The height of the breast platform shall be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when in use by a patient seated in a wheelchair....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
221.2.2 Integration
Wheelchair spaces shall be an integral part of the seating plan. 36.308 Seating in Assembly Areas....
-
TOTO Drake® Two-Piece Toilet, 1.6 GPF, ADA Compliant, Elongated Bowl Best Drake 2 Piece ADA Toilet
So whether it be a replacement toilet seat, a new bath tub or a whole new, higher efficiency money saving toilet, Toto has what you need, at a reasonable price....
-
§ 38.75(b)
(b) Where designated wheelchair or mobility aid seating locations are provided, signs shall indicate the location and advise other passengers of the need to permit wheelchair and mobility...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal...
