Handrails shall be continuous within the full length of each stair flight or ramp run....
Search Results "Curb Ramp Surface"
-
505.3 Continuity
-
505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
- National Restaurant Association - Americans with Disabilities Act Toolkit
-
505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
1.9.1.1 Application
Publicly funded buildings, structures, sidewalks, curbs and related facilities shall be accessible to and usable by persons with disabilities as follows: Advisory 1.9.1.1 Application...
-
1.9.1.1 Application
Publicly funded buildings, structures, sidewalks, curbs and related facilities shall be accessible to and usable by persons with disabilities as follows: Advisory 1.9.1.1 Application...
-
1.9.1.1 Application
Publicly funded buildings, structures, sidewalks, curbs and related facilities shall be accessible to and usable by persons with disabilities as follows: Advisory 1.9.1.1 Application...
- SafePath Courtedge™ Reducer Ramps
-
Attachment A: Violations Identified in the United States' Letter of Findings (Sept. 29, 2014)
[See subsections ...]
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
-
F235.3 Boarding Piers at Boat Launch Ramps
Where boarding piers are provided at boat launch ramps, at least 5 percent, but no fewer than one, of the boarding piers shall comply with 1003.3.2....
-
235.3 Boarding Piers at Boat Launch Ramps
Where boarding piers are provided at boat launch ramps, at least 5 percent, but no fewer than one, of the boarding piers shall comply with 1003.3.2....
-
INTRODUCTION
, the surface returns to its original condition; Firmness – the degree of surface resistance to deformation, especially by indentation or the movement of objects; and Slip-resistance...
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
409.4.2 Floor Surfaces
409.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-902 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 DINING SURFACES AND WORK SURFACES
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces.
[See subsections ...]
-
11B-902 Dining surfaces and work surfaces
[See subsections ...]
-
11B-226 Dining surfaces and work surfaces
[See subsections ...]