Under the 1991 Standards, only one locker of each type provided must be accessible....
Search Results "Brand Standards"
Filters
Commonly Searched Documents
-
225.2.1 Storage
-
R104.2 MUTCD
Guidance, option, and support statements, as defined in section 1A.13 of the MUTCD, shall be used to assist in the interpretation of the standard statements....
-
A. Title III of the ADA and its Implementing Regulations
design or construct facilities, or make alterations to the maximum extent feasible, that are “readily accessible to and usable by individuals with disabilities . . . in accordance with standards...
-
4.3 Periodic Reviews.
updating the self-evaluation required by paragraph (c)(2) of that Section. 28 CFR § 35.151 requires that new construction and alterations be accomplished in accordance with appropriate design standards...
-
1. What is considered an "accessible" play component?
Section 240 of the ADA Standards (F240 in the ABA Standards) establishes the scoping requirements for "accessible" play components....
-
11B-407.2.1.6 Keypads
Where keypads are provided, keypads shall be in a standard telephone keypad arrangement and shall comply with Section 11B-407.4.7.2....
-
A.5 - Are there regulations implementing Section 508?
Access Board Standards....
-
Physical Accessibility
work that began on public schools on or after March 15, 2012, the 2010 ADA Standards for Accessible Design (2010 ADA Standards) apply.112 However, when a public school is required to...
-
III-7.1000 General
funds), and the private sector American National Standard Institute's ANSI A117.1 standards....
-
[2010 ADAS] 105.2.3 ASTM
F 1292-99 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment 11B-1008.2.6.2 F 1292-04 Standard Specification...
-
ASTM
-04: Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment 11B-1008.2.6.2 F1487-01: Standard Consumer Safety Performance Specification...
-
218 and 810 Transportation Facilities
The 2010 Standards at sections 218, 810.5, 705.1, and 705.2 only require detectable warnings at transit platform edges....
-
New construction and alteration requirements
The ADA requires that newly constructed facilities, first occupied on or after January 26, 1993, meet or exceed the minimum requirements of the ADA Standards for Accessible Design (Standards...
-
Section 35.150(b)(2) Safe harbor (Section-by-Section Analysis)
The 2010 Standards introduce technical and scoping specifications for many elements not covered by the 1991 Standards....
-
410.4 Minimize Interference (Section-by-Section Analysis)
This section closely corresponds to existing 508 Standards § 1194.23(i) and 255 Guidelines § 1193.43(h), but also incorporates by references consensus standards developed since the 508 Standards...
-
11B-406 Curb ramps, blended transitions and islands
[2010 ADA Standards] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the italicized...
-
General: ADA Standard Section 221.1
Section 221.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for assembly areas.
-
IV. SPECIFIC RELIEF
References to “Standards” in this Agreement refer to the 2010 ADA Standards for Accessible Design (“Standards”)....
-
LIMITATION ON BARRIER REMOVAL OBLIGATIONS
§36.304(g)(1) The requirements for barrier removal under §36.304 shall not be interpreted to exceed the standards for alterations in subpart D of this part....
-
Clear Floor or Ground Space and Turning Space
This guide explains requirements in the ADA Standards for clear floor or ground space and turning space....
-
§ 35.151(b)(4)(ii)(C) Safe harbor
If a public entity has constructed or altered required elements of a path of travel in accordance with the specifications in either the 1991 Standards or the Uniform Federal Accessibility...
-
ARGUMENT
The revisions to the ADA Standards for Accessible Design do not change the outcome here because the 2010 Standards regarding public entrances are intended to achieve the same result as the...
-
Ground Surfaces: ADA Standard Section 1008.2.6
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
11B-602.3 Operable parts
[2010 ADA Standards] 602.3 Operable Parts. Operable parts shall comply with 309....