Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
Search Results "High Speed Rail"
-
11B-504.2 Treads and risers
-
§ 37.35(a)
(a) Transportation service provided by bus or other vehicle by an intercity commuter or rail operator, as an extension of or supplement to its rail service, and which connects an intercity...
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
- American Dryer, Inc eXtremeAir eXt Hand Dryer
-
Safety
GSA requires users to operate their Segway at a speed no greater than a walking pace of three (3) miles per hour. ...
-
Accessible Route
requirement that where elevators or wheelchair lifts are provided on an accessible route to wheelchair spaces or designated aisle seats, they shall be provided in "such number, capacity, and speed...
-
§ 37.87(d)(1)
(1) By having and implementing, in its agreement with any intercity railroad or commuter authority that serves as a source of used intercity or commuter rail cars for a lease of seven days...
-
6. TO USE THE PHONE I WILL NEED:
TO USE THE PHONE I WILL NEED:* TTY Cordless Large buttons Speaker phone - hands free phone Speed dialing Amplified volume and loud ringer...
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
§ 37.87(d)(2)
(2) By documenting that, when there is more than one source of intercity or commuter rail cars for a lease of seven days or less, the lessee has obtained all available accessible intercity...
-
Public Entity
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
§ 37.121(c)
(c) Requirements for complementary paratransit do not apply to commuter bus, commuter rail, or intercity rail systems....
-
5. Conflicts Between Shared Path Users
submitted in response to the ANPRM expressed concern about the risk of collisions between pedestrians who are blind or have low vision and bicyclists who pass them too closely at fast speeds...
-
Clear Floor or Ground Space
Clear Floor or Ground Space At least one clear floor or ground space (30 inches by 48 inches minimum) must be provided at each location that has a railing height of 34 inches maximum....
-
12184(b)(7)
(7) the remanufacture by such entity of a rail passenger car that is to be used to provide specified public transportation so as to extend its usable life for 10 years or more, or the purchase...
- U.S. Department of Transportation, Federal Transit Administration, Office of Civil Rights
-
12184(c)(2) Definition
(2) Definition As used in this subsection, the term "historical or antiquated rail passenger car" means a rail passenger car...
-
§ 37.123(e)(2)(iii)
(iii) With respect to rail systems, an individual is eligible under this paragraph if the individual could use an accessible rail system, but—...
-
Priority 1: Approach & Entrance
Word Fillable Form (1.5MB) Word Non-Fillable Form (1.3MB) PDF Non-Fillable Form (0.8MB)
- Rockwood Manufacturing Company 702 Handrail Bracket
- Symmetry Limited Use/Limited Application (LU/LA) Elevator