Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars...
Search Results "Grab Bar Reinforcement"
Filters
Commonly Searched Documents
-
11B-705.2 Detectable directional texture
-
407.10 Privacy (Section-by-Section Analysis)
Many people with low vision use speech output to supplement or reinforce on-screen prompts....
-
E. Restaurants and Concessions:
PSE shall continue to provide accessible tables, marked with the International Symbol for Accessibility, within the bar areas of the Red Bull Bar and Captain Morgan's Bar located in the...
-
1132A.8 Hand-activated door hardware
Latching and locking doors that are hand-activated and on an accessible route shall be operable with a single effort by lever-type hardware, panic bars, push-pull activating bars or other...
-
Studies of Wheeled Mobility Devices and Transferring Abilities
Impact of Transfer Setup on the Performance of Independent Transfers: Final Report provides an analysis of the effect of height, horizontal gap, placement of armrests, and placement of grab...
-
Supplementary Information:
Reinforced walls for grab bars. Requirement 7. Usable kitchens and bathrooms. The design specifications presented in the Guidelines are recommended guidelines only....
-
M305.3 Standing Supports (Section-by-Section Analysis)
In the MDE NPRM preamble, the Access Board noted that it was considering adopting the cross section dimensions for grab bars from the 2004 ADA and ABA Accessibility Guidelines and applying...
-
2010 ADA Standards
For example, if this document requires “1½ inches,” avoid specifying “1½ inches plus or minus X inches. ”Where the requirement states a specified range, such as in Section 609.4 where grab...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in Section 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
5.4.3 Transfer Support Height for M301 and M302
The minimum height is consistent with the information provided by Midmark Corporation on examination tableside rails, and the maximum height is generally consistent with the height of grab...
-
104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
1 - Design and drawing
Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor....
-
Prepare different kits for different places and situations:
Grab and go kit is an easy-to-carry kit you can grab if you have to leave home (or school, workplace, etc.) in a hurry....
-
1. Making Facilities Accessible and Usable
For example: A restroom may be modified to meet standard accessibility requirements (including wider door and stalls, and grab bars in specified locations) but it may be necessary to install...
-
NSS Questions and Concerns
A revealing example: The Red Cross’s 2011 survey version asks regarding restroom grab bars: “Appropriate Grab Bars yes/no,” as compared to the DOJ questions which asks: “Is a horizontal...
-
4.2 Existing Facilities.
Such other methods include redesign of equipment, reassignment of services to accessible buildings, and assignment of aides to beneficiaries. 4.2.2 Appendix A to 28 CFR part 35 reinforces...
-
Shower Threshold
final rule includes an exception that permits a threshold up to 2 inches high at transfer showers in existing facilities where providing a ½ inch threshold would disturb the structural reinforcement...
-
Technical Infeasibility
re-grading and other design solutions are not feasible; or work that would impact load-bearing walls and other essential components of the structural frame, including structural reinforcement...
-
Speakman Versatile ADA Handheld Shower System SM-5490-ADA
Technical Specifications Features VS-100-PC Hand Shower Includes adjustable ADA Grab Bar With thermostatic shower valve Flexible stainless steel hose...
-
Detectable Warning Systems, Inc. AlertTile® Detectable Warning
alerttile® is a glass reinforced thermoset composite engineered for superior impact resistance, slip resistance, wear resistance and long-term durability for retrofit applications. alerttile...
-
American Specialties Retractable Shower Seat 170
Seat has reinforced channels. Wall sub frame furnished, with welded on masonry anchors....
-
Bobrick Narcotics Cabinet B-7316
Double wall, all welded construction throughout and reinforced corners and doors provide security of narcotics and conform to Department of Justice (DOJ) standards for the storage of controlled...
-
3) Restaurants
Contains requirements for counters and bars, access aisles, food service lines, tableware and condiment areas, raised speaker's platforms, and vending machine areas (but not controls)....
