The 60 inch centerline height also provides uniformity as well as convenience in reading signs from a standing position....
Search Results "Water Closet Centerline"
Filters
Commonly Searched Documents
-
Mounting Location and Height [4.30.6]
-
Birthing Room Bath Tub Accessibility
Where provided, one water closet, one lavatory, and one bathtub or shower shall comply with the applicable requirements of 11B-603 (Toilet and Bathing Rooms) through 11B-610 (Seats)....
-
608.5.1 Transfer Type Shower Compartments
side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline...
-
R305.2.5 Pedestrian At-Grade Rail Crossings
The edge of the detectable warning surface nearest the rail crossing shall be 1.8 m (6.0 ft) minimum and 4.6 m (15.0 ft) maximum from the centerline of the nearest rail....
-
608.5.1 Transfer Type Shower Compartments
side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline...
-
Machinery Spaces: ADA Standard Section 203.5
Section 203.5 covers scoping requirements of general exceptions for machinery spaces in the most current ADA Standards.
-
11B-203.5 Machinery spaces
Machinery spaces include, but are not limited to, elevator pits or elevator penthouses; mechanical, electrical or communications equipment rooms; piping or equipment catwalks; water or sewage...
-
Access-Able Designs Portable Clamp-On Tub Seat SH-426
Finally a portable seat that meets ADA requirements to be securely mounted and has the correct height of 17-19” Finally a portable seat that doesn't clutter up the room or closet...
-
Tobin Passage Levers Door Hardware
Tobin Passage Levers, Passage/Hall/Closet Levers FEATURES: Solid construction Superior chassis with powerpack compression springs for operational strength ANSI/BHMA Grade 2...
-
11B-809.2.1 Location
Where only one accessible route is provided, it shall not pass through bathrooms, closets, or similar spaces....
-
809.2.1 Location
Where only one accessible route is provided, it shall not pass through bathrooms, closets, or similar spaces....
-
809.2.1 Location
Where only one accessible route is provided, it shall not pass through bathrooms, closets, or similar spaces....
-
11B-809.2.1 Location
Where only one accessible route is provided, it shall not pass through bathrooms, closets, or similar spaces....
-
11B-809.2.1 Location
Where only one accessible route is provided, it shall not pass through bathrooms, closets, or similar spaces....
-
Visual Alarms [4.28.3]
Visual alarms are not required in areas used solely as employee work areas or in mechanical, electrical, or telephone closets, janitor's closets, or similar non-occupiable spaces....
-
Clear Deck Space: ADA Standard Section 1009.2.3
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
11B-1009.2.3 Clear deck space
On the side of the seat opposite the water, a clear deck space shall be provided parallel with the seat....
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
Therefore, under these rules a transfer surface with a fixed height of 19 inches meets the definition of accessibility.11 Nineteen-inch water closet and toilet seats are accessible:...
-
[ADA Title II §35.151(b)(4)(i)] Primary function
(A) Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, and corridors are not areas containing a primary function....
-
Kohler C3® 200 Elongated Bidet Toilet Seat With In-line Heater and Remote Control Video
There are two separate water nozzles for the anterior and posterior that spray the user with warm aerated water. It is made of anti-microbial plastic. ...
-
407.2.2.2 Visible Signals
The visible signal elements shall be 2½ inches (64 mm) minimum measured along the vertical centerline of the element....
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Components of diagnostic equipment are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
407.2.2.2 Visible Signals
The visible signal elements shall be 2 1/2 inches (64 mm) minimum measured along the vertical centerline of the element....
