Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
Search Results "Visible Signal (Elevator Landing)"
Filters
Commonly Searched Documents
-
11B-409.4.2 Floor surfaces
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-409.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-409.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Sections 11B-302 and 11B-303....
-
11B-233.3.1.2.5 Multi-story residential dwelling units in buildings with no elevator
In non-elevator buildings, a minimum of 10 percent but not less than one of the ground floor multi-story residential dwelling units shall be calculated using the total number of multi-story...
-
A4.1.3(5)
A4.1.3(5) Only full passenger elevators are covered by the accessibility provisions of 4.10....
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
Figure 1008.3.2 Transfer Steps – Drawing from the U.S. Access Board
-
11B-408 LIMITED-USE/LIMITED-APPLICATION ELEVATORS
[See subsections ...]
-
11B-408 Limited-use/limited-application elevators
[See subsections ...]
-
11B-408 Limited-use/limited-application elevators
[See subsections ...]
-
11B-407.4.6.2 Buttons
[2010 ADAS] EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
5c.
Are the highest floor control buttons in the elevator cab mounted no more than 54 inches above the floor for a side reach or 48 inches for forward reach? Yes _____ No _____...
-
11B-407.4.6.2 Buttons
[2010 ADAS] EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
11B-407.4.6.2 Buttons
[2010 ADA Standards] EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....
-
11B-411.3.4 Door delay
Door delay shall comply with Section 11B-407.3.5.
-
11B-411.3.4 Door delay
Door delay shall comply with Section 11B-407.3.5.
-
11B-411.3.4 Door delay
Door delay shall comply with Section 11B-407.3.5.
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
407.4.3 Platform to Hoistway Clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
Components: ADA Standard Section 402.2
Section 402.2 covers the current ADA Standards for components of an accessible routes.
-
Question 22
Are there any obstacles that block access to lift or elevator controls? Obstacles may include trash receptacles or cigarette urns....
