Additionally, accessible vertical interior circulation must be in the same area as stairs and escalators, not isolated in the back of the facility....
Search Results "Vertical Dispersion"
Filters
Commonly Searched Documents
-
206.3 Location
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
A4.31.9 Text Telephones
phone, a text telephone which is not a single integrated text telephone pay phone unit will require a shelf large enough (10 in (255mm) wide by 10 in (255 mm) deep with a 6 in (150 mm) vertical...
-
Clear Floor Space [4.2.4]
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support....
-
Water closet
With grab bars in the vertical or up position, sufficient space was provided for caregivers to stand next to the toilet on either (or both) side(s) to provide support getting on and off...
-
Slope [§405.2] and Cross Slope [§405.3]
Slope [§405.2] and Cross Slope [§405.3] Slope represents the proportion of vertical rise to horizontal length and is specified in the Standards as a ratio (e.g., 1:12)....
-
Additional Technical Criteria Considered for Handrails on Ramps
M303.3.3.5 would require handrails to be provided on each side of the ramp when the vertical rise of the ramp exceeds 6 inches....
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
Level changes up to ¼ inch high are permitted to be vertical. Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
18) Elevators and platform lifts in new construction and alterations
Therefore, elevators are required in all new multilevel buildings or facilities, but vertical access to elevator pits, elevator penthouses, mechanical rooms, and piping or equipment catwalks...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Where a door is provided the symbol shall be mounted within 1 inch (25 mm) of the vertical centerline of the door....
-
Kessel Design Linearis Super60 Trench Drain
Flexible installation - channel cover can be reversed, tilted and vertically adjusted Optimum cleaning via the service access cover Variable installation depth thanks to...
-
Kawneer North America 350/500 Heavy Wall™ Entrances
office buildings Door and frame have 3/16" (4.8) walls throughout for additional durability and strength The door is 2" (50.8) deep with a 6-1/2" (165.1) bottom rail and 3-1/2" (88.9) vertical...
-
Chapter 1: Background
The primary goal of this project is to determine acceptable ranges for non-level transfers (e.g. vertical height differences), gaps between the transfer surface and wheelchair, and the clear...
-
LifeGuard Pool Lift #100287
Arm Rests – one rotating for access and one stationary for safety Foot rest Safety belt Cement in sleeve anchor Fully ADA Compliant Rotational and vertically...
-
SafePath Courtedge™ Reducer Ramps
CourtEdge™ Reducers are designed to provide compliance for hundreds of sport floor vertical riseconfigurations....
-
Bobrick Swing-Up Grab Bar B-4998
satin-finish stainless steel Swing-up grab bar is manually raised for approach or departure and lowered to horizontal position for support; once grab bar is raised to the full upright (vertical...
-
Equalizer 1000 Series Exercise Machine
Station 1: Vertical Bench Press Most of the major muscle groups (chest, shoulder, triceps, and back muscles) in your upper body are exercised using the Vertical Bench Press Station....
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be a minimum of 42 inches (1067 mm) and a maximum of 48 inches (1219 mm) measured vertically, from the floor level to the activating handle...
-
1127B.5, Item 4
at the upper end of each curb ramp over its full width to permit safe egress from the ramp surface, or the slope of the fanned or flared sides of the curb ramp shall not exceed one unit vertical...
-
A. Changes in Level
Abrupt Level Changes - Are hallways and corridors free of any steps or abrupt vertical level changes over 1/4" that will impede access for persons who use wheelchairs, walkers, and other...
-
608.6 Shower Spray Unit and Water
If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars....
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
These values apply to the vertical component of the field strength inside the area enclosed by the loop, measured 1.2 meters above the floor....
