(Exposed mounting points) Napkin Disposal: Self closing push panel door is fabricated of #22 gauge stainless steel....
Search Results "Post Mounted Object"
-
AJW Architectural Products U683 Dual Stall Toilet Tissue Dispenser & Sanitary Napkin Disposal - Partition Mounted
-
11B-306.3.3 Minimum required depth
inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in lavatory or at the front edge of a wall-mounted...
-
11B-306.3.3 Minimum required depth
inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in lavatory or at the front edge of a wall-mounted...
-
AJW Architectural Products U127 40 oz. Vertical Liquid Soap Dispenser w/ Push-up Valve - Surface Mounted
Valve operates with less than 5 lbs of force and when mounted properly will comply with ADA code. Viewer: Clear plastic window allows a constant fluid level check....
-
1008.3.2.3 Transfer Supports
Some examples of supports include a rope loop, a loop type handle, a slot in the edge of a flat horizontal or vertical member, poles or bars, or D rings on the corner posts....
-
Methods
Post the notice at facilities. Publish the notice in local newspapers....
-
11B-503.6 Identification
It shall be permanently posted immediately adjacent to and visible from the passenger loading zone stating “Passenger Loading Zone Only” and including the International Symbol of Accessibility...
-
11B-810.4 Bus signs
Exception: Bus schedules, timetables and maps that are posted at the bus stop or bus bay shall not be required to comply....
-
1008.3.2.3 Transfer Supports
Some examples of supports include a rope loop, a loop type handle, a slot in the edge of a flat horizontal or vertical member, poles or bars, or D rings on the corner posts....
-
AJW Architectural Products U169 Series Lever Operated, Roll Towel Dispenser - Surface Mounted
Back: #22 ga stainless steel, with key holes slots for mounting....
-
EVSE AutoWind EV (Electric Vehicle) Charger Single Pole, Dual Pole or Wall Mount
J1772 requirements to meet or exceed all safety codes specified by UL and NEC, the unit is engineered for commercial interior or exterior locations and comes in single or dual wall or pole mounted...
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
407.3.3 Reopening Device
Elevator doors shall be provided with a reopening device complying with 407.3.3 that shall stop and reopen a car door and hoistway door automatically if the door becomes obstructed by an object...
-
11B-803.6 Mirrors
Mirrors shall be full length with a reflective surface 18 inches (457 mm) wide minimum by 54 inches (1372 mm) high minimum and shall be mounted in a position affording a view to a person...
-
Recommendations
devices including scooters a minimum flat surface of 33 in. length for platforms accommodating wheeled mobility devices excluding scooters aids that can help wheelchair users mount...
-
4.21.3 SEAT
The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the bathroom floor and shall extend the full depth of the stall. The seat shall be on the wall opposite the controls....
-
Digital inclinometers (SmartTool®)
The individual electronic module can also be mounted on other devices to create customized measuring instruments....
-
11B-803.6 Mirrors
Mirrors shall be full length with a reflective surface 18 inches (457 mm) wide minimum by 54 inches (1372 mm) high minimum and shall be mounted in a position affording a view to a person...
-
11B-604.7.2 Disposal units
Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
-
11B-803.6 Mirrors
Mirrors shall be full length with a reflective surface 18 inches (457 mm) wide minimum by 54 inches (1372 mm) high minimum and shall be mounted in a position affording a view to a person...
-
HEWI Range 260 Door Hardware
A clear style marked by ergonomic objectivity defines Range 260. The flat, elliptical shape of the lever handle affords a high level of gripping comfort....
