In individual residential dwelling units, where a bathroom or a kitchen is substantially altered, and at least one other room is altered, the requirements of 233.3.1 shall apply to the altered...
Search Results "Kitchen Counter"
-
233.3.5 Alterations, F233.3.4 Alterations, F233.4.5 Alterations
-
Table Surface Height
These commenters recommended that where only a portion of counters are made accessible, the accessible height should be 31 inches maximum....
-
Clear Floor Space [4.2.4]
A clearance at least 27 inches high and 19 inches deep is necessary for a person using a wheelchair to pull-up to tables and counters....
-
A4.1.1(3) Areas Used Only by Employees as Work Areas
., laboratories, service counters, ticket booths), 5%, but not less than one, of each type of work station should be constructed so that an individual with disabilities can maneuver within...
-
Employee Work Areas [§206.2.8]
This applies to the size of work areas as defined by permanently installed walls, partitions, counters, casework, or furnishings, but not modular partitions or furnishings, including systems...
-
Technical Memorandum TM 2012-02 Emergency Response Buildings and Facilities
2012 TAS shall apply to buildings and facilities serving emergency response personnel: Crew quarters that are used exclusively as a residence by emergency response personnel and the kitchens...
-
1136A.1 Receptacle heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet), receptacles shall be located within the reach ranges specified in Section 1138A.3....
- Georgia-Pacific SmartStock® Classic Medium-weight Polystyrene Knife Dispenser
- Kompan, Inc. M591 - Waterfall Play Structure
-
Dispersion: ADA Standard Section 224.5
Section 224.5 covers scoping requirements in the current ADA Standards for dispersion of transient lodging guest rooms.
-
11B-224.5 Dispersion
purposes of the application of this section, the term "sleeping room" is intended to be used interchangeably with the term "guest room" as it is used in the transient lodging standards. 1) Kitchens...
-
11B-224.5 Dispersion
purposes of the application of this section, the term "sleeping room" is intended to be used interchangeably with the term "guest room" as it is used in the transient lodging standards. 1) Kitchens...
- Grohe Concetto Faucets
-
11B-206.3 Location
An accessible route shall not pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except as permitted by Chapter 10. U.S....
-
11B-106.5 Defined terms
Then Kitchen or Kitchenette May NFPA Nosing Pedestrian Permanent...
-
1136A.1 Receptacle heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet), receptacles shall be located within the reach ranges specified in Section 1138A.3....
-
11B-106.5 Defined terms
Then Kitchen or Kitchenette May NFPA Nosing Pedestrian Permanent...
-
11B-206.3 Location
An accessible route shall not pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except as permitted by Chapter 10. U.S....
-
1136A.1 Receptacle heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet), receptacles shall be located within the reach ranges specified in Section 1138A.3....
-
11B-206.3 Location
An accessible route shall not pass through kitchens, storage rooms, restrooms, closets or other spaces used for similar purposes, except as permitted by Chapter 10. U.S....
-
11B-306.3.3 Minimum required depth
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
Play Tables
Play Tables Play tables are surfaces, boards, slabs, or counters that are created for play....
-
11B-306.3.3 Minimum required depth
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
11B-306.3.3 Minimum required depth
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...