Doorways less than 36 inches (914 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 11B-404.2.4.2....
Search Results "Baby Changing Table"
Commonly Searched Documents
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
-
11B-703.8.5 Character width
Low resolution VMS characters shall comply with the pixel count for character width in Table 11B-703.8.5....
-
11B-809.8 Doors
Changes in level shall comply with Section 11B-809.7.2. b....
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....
- Pager Receiver (BE1230)
-
11B-703.8.9 Height above floor
Heights of low resolution variable message sign characters shall comply with Table 11B-703.8.4, based on the size of the characters on the sign....
- Brewer 3000 LiftMate Low / High Patient Lift
-
Receivers: ADA Standard Section 219.3
Section 219.3 covers scoping requirements in the current ADA Standards for receivers for assistive listening systems.
-
11B-235.2 Boat slips
Boat slips complying with Section 11B-1003.3.1 shall be provided in accordance with Table 11B-235.2....
-
6. Discussion of Final Rule
Appendix A contains the Table of Contents. Appendix B contains the scoping requirements for facilities covered by the ADA....
-
208 Parking Spaces
parking spaces are provided for self-parking by employees or visitors, or both, then accessible spaces complying with 4.6 shall be provided in each such parking area in conformance with the table...
-
Signal Clearance Intervals
Signal clearance intervals are intended to allow those roadway users who are approaching a traffic signal that changes to yellow, and cannot stop before the signal turns red, time to enter...
-
M301.2.1 Transfer Surface Height
Some CT tables can currently meet an 18 or 19 inch height and with redesign, more tables for use with equipment with bores would be able to....
-
SCOPING SCENARIOS: RANGE OF POSSIBILITIES
If the market adoption rate of adjustable tables were to match a requirement that one table of every five tables meet a 19 inch lower adjustable range when facility construction occurs,...
-
Slope: ADA Standard Section 405.2
Section 405.2 covers the current ADA Standards for slope requirements on ramps.
- Diversified Woodcrafts - Forward Vision & Brad (Teacher Series) Promotional Video
-
Performance and the Surface Deficiency Score
If a surface location was found to have any of the four deficiencies (excessive running slope, cross slope, change in level, or openings), the location was awarded a value of 1 for each....
-
Keypads: ADA Standard Section 407.4.7.2
Section 407.4.7.2 covers the current ADA Standards for designations and indicators on elevator keypads.
-
1. Getting Started
It also means getting to and into the office, getting on the exam table and the equipment and getting equal care as that provided to others. ...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
table or chair....
-
11B-604.9 Water closets and toilet compartments for children's use
When the exception in Section 11B-604.1 is used, the suggested dimensions of Table 11B-604.9 for a single age group shall be applied consistently to the installation of a water closet and...
-
Guest Rooms with Mobility Features: ADA Standard Section 224.2
Section 224.2 covers scoping requirements in the current ADA Standards for transient lodging guest rooms with mobility features.
-
Self-Service Storage Facilities: ADA Standard Section 225.3
Section 225.3 covers scoping requirements in the current ADA Standards for self-service storage facilities.