The provision and location of wheelchair seating spaces and companion seats and designated aisle seats in newly constructed or altered assembly areas shall be governed by the standards for...
Search Results "Aisle Chair"
-
§ 36.308(b) New construction and alterations
-
11B-206.7.2 Wheelchair spaces
route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and 11B-802 _|Wheelchair Spaces, Companion Seats, and Designated Aisle...
-
8.4 CARD CATALOGS
Minimum clear aisle space at card catalogs, magazine displays, or reference stacks shall comply with Fig. 55....
-
11B-206.7.2 Wheelchair spaces
route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and 11B-802 _|Wheelchair Spaces, Companion Seats, and Designated Aisle...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
Entry Doors
Keep in mind that the hallway outside of the door and the space inside the door should be kept free of boxes, chairs, or equipment, so that they do not interfere with the maneuvering clearance...
-
11B-221.2.4 Temporary structures
Advisory 11B-221.2.4 Removable chairs. Readily removable seats should be designed to facilitate easy, timely and frequent removal and installation. ...
-
11B-221.2.4 Temporary structures
Advisory 11B-221.2.5 [sic] Removable chairs. Readily removable seats should be designed to facilitate easy, timely and frequent removal and installation....
-
Base Support [No specific provision—affects M303.2.4]
A maximum base support height of 1.5 inches will provide room for the structural components necessary for an effective base support design and will also be accessible by ~92% of manual chair...
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area.16 As mentioned above, a minimum standard of 19 inches at the highest point of a table or chair...
-
Do accessible routes that cross vehicular ways need to be marked as a crossing?
The Standards only require access aisles at accessible parking spaces and accessible passenger loading zones to be marked....
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
5.8.1.1 Clear Platform Size Recommendation
recommends this platform dimension.iv These study findings noted that a 36-inch length accommodates standard manual and power wheelchairs and most, if not all, large size-extra wide manual chairs...
-
Emergency Egress
rescue assistance accessible egress routes that coincide with other exit routes to avoid forcing a person using a wheelchair to travel against the general flow increased aisle...
-
Protruding Objects
., fire extinguishers, telephones) shall protrude no more than 4 inches into walks, halls, corridors, passageways, aisles, or any other areas where a person walks....
-
Path of Travel
consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other improved areas; parking access aisles...
-
Clear Floor Space: ADA Standard Section 1004.1
To optimize space use, designers should carefully consider layout options such as connecting ends of the row and center aisle spaces....
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
6.5
shall comply with the size requirements set forth in § 4.33.2 of the Standards, be level and satisfy the floor surface requirements as set forth in § 4.33.4 of the Standards, and the cross-aisles...
-
Do the surface requirements, including those for maximum slope (1:48), apply to all portions of a parking lot?
No, the surface criteria apply only to accessible parking spaces, access aisles, and accessible routes, including those serving other elements or spaces besides parking spaces....
-
HOW TO MEASURE TRANSFER HEIGHTS IS IMPORTANT
These proposed measurement techniques would apply equally to tables (M301) and chairs (M302)....
-
Height – M301.2.1 & M302.2.1
M301.2.1 & M302.2.1 The subcommittee discussed the increments for adjustability and decided that infinite adjustability is the appropriate standard as both electronic and manual pump chairs...
-
List of Subjects in 36 CFR Part 1195
Nancy Starnes, Chair....