Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
Search Results "Maximum Dimension"
Filters
Commonly Searched Documents
-
11B-608.9 Shower floor or ground surface
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
Grab bars
The outside diameter dimension range for circular cross-section grab bars are between 1.25 and 2 inches. A 1.5 inch diameter was chosen for the study....
-
A4.32.4 Height of Tables or Counters
34 865 Seated in a 16 in (405 mm) high chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 1All dimensions...
-
A4.32.4 HEIGHT OF WORK SURFACES
Seated in a 16-in (405-mm)-high chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 * All dimensions...
-
The ADA Standards for Accessible Design (the ADA Standards)
The ADA Standards identify what features need to be accessible, set forth the number of those features that need to be made accessible, and then provide the specific measurements, dimensions...
-
Sections 4.8.5 and 4.9.4
An exception permits the distance between the horizontal projections and the bottom of the gripping surface to be reduced by 1/8 inch for each ½ inch of additional handrail perimeter dimension...
-
Water Closet Centerline and Seat Height
Water closets can be located so that this dimension is met on either the left side or the right side of the fixture....
-
13. Do the provisions for openings in floor and ground surfaces in Section 302.3 apply to walking surfaces in play areas?
If gratings or openings have elongated openings, they must be placed so the long dimension is perpendicular to the dominant direction of travel....
-
COST OF EQUIPMENT
COST OF EQUIPMENT Table 1: Cost of Equipment Configurations Dimensions Price Range Average Price Price Increase Configuration #1:...
-
Supporting Documents for the Medical Diagnostic Equipment Accessibility Standards Advisory Committee Report
Subcommittee Report - Imaging Equipment Subcommittee Report - Mammography Subcommittee Report - Stretchers Subcommittee Report - Weight Scales IDeA Center Memo – Transfer Surface Dimensions...
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
However, if a transportation operator procures vehicles with lifts that have a design load of more than 600 pounds, or the platform and vehicle will accommodate a wheelchair that exceeds the dimension...
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
However, if a transportation operator procures vehicles with lifts that have a design load of more than 600 pounds, or the platform and vehicle will accommodate a wheelchair that exceeds the dimension...
-
Doorways [4.8.4]
Keeping the door swing clear of minimum landing dimensions is a good idea, especially at the bottom of ramps since people using wheelchairs may exit them with some force and speed....
-
4.10.4 HALL LANTERNS
(2) Visual elements shall be at least 2-1/2 in (64 mm) in the smallest dimension. (3) Signals shall be visible from the vicinity of the hall call button....
-
1017.10 Trailhead Signs
Typical and maximum running slope; and 5. Typical and maximum cross slope....
-
407.8.3.2 Obstructed Forward Reach
Where the operable part is located beyond the leading edge of the maximum protrusion within the length of the vertical reference plane, the operable part shall conform to 407.8.3.2....
-
1017.10 Trailhead Signs
Typical and maximum running slope; and 5. Typical and maximum cross slope....
-
Door and Gate Hardware: ADA Standard Section 404.2.7
Section 404.2.7 covers the current ADA Standards for door and gate hardware.
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADAS] 303.2 Vertical. ...
-
407.8.3.1 Unobstructed Forward Reach
Where the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference plane of the ICT, the operable part shall be 48 inches (1220...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum....