Does the lavatory have at least a 29-inch-high clearance under the front edge and the top of the rim no more than 34 inches above the floor?...
Search Results "High Drinking Fountain"
-
M9
-
E2-c
Are any interior stairs along these routes configured with a cane-detectable warning or a barrier that prevents travel into the area with less than an 80-inch high head clearance so that...
-
4.30.4* Raised and Brailled Characters and Pictorial Symbol Signs
Raised characters shall be at least 5/8 in (16 mm) high, but no higher than 2 in (50 mm)....
-
Islands [4.7.11]
If there is no level space between ramps, wheelchairs can "bottom out" or "high center" while proceeding down one ramp while the back wheels are coming up the other slope....
-
Resources:
Safety, A Guide For People with Disabilities and Other Activity Limitation (2002) Emergency Response for People Who Have Access and Functional Needs: A Guide for First Responders High...
-
Verify Electrical
High and Low 1011...
-
Verify Electrical
High and Low 1011...
-
1015.3 Viewing Space
The viewing space is required to be 32 inches maximum and 51 inches minimum high above the ground and extend the full width of the clear ground space....
-
§1630.2(j)(4)(iii)
For example, someone with a learning disability may achieve a high level of academic success, but may nevertheless be substantially limited in the major life activity of learning because...
-
11B-411.2.3.2 Car designation signs
Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
11B-502.6.4.1
The parking space shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 in white on a blue background a minimum 36 inches wide by 36 inches high...
-
11B-411.2.3.2 Car designation signs
Raised characters shall be 2 inches (51 mm) high. Raised characters shall be white on a black background....
-
F226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with 902....
-
Technical Memorandum TM 2013-14 Dining Surfaces
Calculations At least 5% of the seating and standing spaces at fixed or built-in dining surfaces provided for the consumption of food or drink must comply with 902 based on TAS 226.2....
-
Purpose of the Workshop
Create high-definition environments for people with visual impairment So we look to put together some concepts for creating a more high-definition environment for people who are visually...
-
Annualized Cost of New or Revised Accessibility Requirements in the 2016 Non-Rail Vehicle Guidelines
OTRBs, All Regulatory Years (3% and 7% Discount Rates) Discount Rate Low Scenario ($millions) Primary Scenario ($millions) High...
-
4.3 Locker Room Barriers and Solutions
Barriers Solutions Easy/Low cost Involved / High cost Not enough space in front of the lockers Ask staff to permanently assign you a...
-
Temporary Solutions for Election Day: Accessible Entrance to Polling Place
Suggestion: If the threshold is not more than 3/4 inches high, add beveled surfaces to both sides of the threshold or replace with a new threshold that is no more than 1/2 inch high and...
-
Data acquisition
The vertical z-axis was chosen because it is parallel to the spine and lower legs of the subject, both of which are high-risk areas for negative health outcomes....
-
11B-810.5.3 Platform and vehicle floor coordination
rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192 or 49 CFR part 38, mini-high...
-
810.5.3 Platform and Vehicle Floor Coordination
rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192 or 49 CFR part 38, mini-high...