Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403....
Search Results "Access Aisle Width"
-
227.5 Queues and Waiting Lines
-
What Are the Requirements for Accessible Routes?
What Are the Requirements for Accessible Routes? ADAAG Section 4.3 addresses accessible routes that connect the play area to the school, parking lot, or facility that it serves. ...
-
Figure 703.7.2.2 International Symbol of TTY – Drawing from the U.S. Access Board
-
Figure 703.7.2.3 Volume Control Telephone – Drawing from the U.S. Access Board
-
227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with 904.3 or 904.4 shall comply with 403....
-
F221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with F221 and 802. In addition, lawn seating shall comply with F221.5....
-
11B-227.5 Queues and Waiting Lines
Queues and waiting lines servicing counters or check-out aisles required to comply with Sections 11B-904.3 or 11B-904.4 shall comply with Section 11B-403....
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, and designated aisle seats complying with 221 and 802. In addition, lawn seating shall comply with 221.5....
-
Access Trax: Accessible Beach and Outdoor Event Mats
Access Trax® is the only modular, foldable, ADA-compliant portable pathway empowering people of all abilities to safely and easily access outdoor terrains such as sand, grass, gravel, and...
-
Accessible Routes
Accessible Routes Accessible routes are continuous, unobstructed paths connecting all accessible elements and spaces of a building or facility....
-
§ 36.304(b)(8)
(8) Widening doors;
-
Sec.36.304(b)(8)
(8) Widening doors;
-
4.1.6(4)(d)
(d) Doors. (i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch...
-
§100.205(c)(2)
(2) All the doors designed to allow passage into and within all premises are sufficiently wide to allow passage by handicapped persons in wheelchairs; and
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open.
-
§ 38.153(c)
(c)
-
§ 38.23(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30 inches; and shall accommodate...
-
§ 38.83(c)(2) Ramp surface
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater then 1/4 inch, shall have a clear width of 30 inches, and shall...
-
Is an accessible route required to rooftop levels?
In facilities where an accessible route is required to each story (§206.2.3), an accessible route must serve rooftop levels that contain public or common use spaces or elements that are...
-
Measuring Door Openings
This measures the clear width of the door opening through which people pass, which is less than the width of the door itself....
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
11B-206.2.4 Spaces and elements
At least one accessible route shall connect accessible building or facility entrances with all accessible spaces and elements within the building or facility, including mezzanines, which...
-
11B-206.2.4 Spaces and elements
At least one accessible route shall connect accessible building or facility entrances with all accessible spaces and elements within the building or facility, including mezzanines, which...
