(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
Search Results "Work Surface"
Filters
Commonly Searched Documents
-
§ 38.79(a)
-
Mobi-mat® Recpath Demonstration Video
Mobi-Mat® RECPATH™ is a patented roll-out non-slip portable access path mat for enhancing wheelchair, strollers, bicycles, ATVs as well as any individual accessibility to...
-
Mobi-Mat® installation
Mobi-Mat® installation video
-
Access Board: Accessible Route Openings
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Pilot Rock APTX Full Sized Pedestal Rectangular Utility Tables Using Recycled Plastic
These larger utility tables provide work or prep area for several people at the same time....
-
Pilot Rock APTX Full Sized Pedestal Rectangular Utility Table Using Lumber
These larger utility tables provide work or prep area for several people at the same time....
-
Resting Intervals [1016.8]
., as flat as possible) so that all the wheels of a mobility device touch the ground surface when turning into and out of the resting interval....
-
Wooster Products Anti-Slip Safety Coatings Systems
SAFE-STRIDE ACRYLIC Safe-Stride® is a specially formulated anti-slip safety paint, which contains grit to help provide a tough, sure-footed, and safer-traction surface Applied to cleaned...
-
23. How should an employer handle requests for modified or part-time schedules for an employee covered by both the ADA and the Family and Medical Leave Act (FMLA)?
health plan during the period of FMLA leave, provided the employee pays his/her share of the premium.(70) Example: An employee with an ADA disability requests that she be excused from work...
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Pilot Rock APTX Full Sized Pedestal Rectangular Utility Tables
These larger utility tables provide work or prep area for several people at the same time....
-
11B-203 General exceptions
with disabilities can approach, enter, and exit the employee work area....
-
7.4.3.2 Cross Slope
Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
1017.8.3 Slope
Where the surface is other than asphalt, concrete, or boards, slopes not steeper than 1:20 are permitted when necessary for drainage....
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
We don’t have to have highly reflective surfaces that will still reflect light but spread it, diffuse that light instead of pinpoint reflections....
-
1017.8.3 Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
-
1017.8.3 Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
-
Section C: Exterior Route
(§303) C3 Is the route free of surface openings greater than 1/2", such as grates or holes in the pavement?...
-
14. What kinds of reasonable accommodations are related to the benefits and privileges of employment?
Example 21: Karin, who is deaf, works as an associate in a large investment firm....
-
A5.1 General
Dining counters (where there is no service) are typically found in small carry-out restaurants, bakeries, or coffee shops and may only be a narrow eating surface attached to a wall....
-
Handrails Along Walkways
Handrails Along Walkways. The 1991 Standards do not contain any technical requirement for handrails provided along walkways that are not ramps. Section 403.6 of the 2010 Standards...
-
1017.7 Slopes
The slopes of trails shall comply with 1017.7.
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run.
