The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
Search Results "Built-In Table"
-
11B-306.2.3 Minimum required depth
-
Knee Clearance: Clearance as Measured from Distal Knee Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., lavatories, drinking fountains)....
-
Curb Ramps [§406]
Curb Ramps [§406] Requirements for curb ramps apply to ramps that cut through curbs or are built up to them....
-
1.1.9 Horizontal gaps and vertical alignment
local horizontal discontinuities and variations in vertical alignment such as at concrete joints, gaps, grade breaks, and at the interface of concrete with other materials or elements built...
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....
-
Before January 26, 1992
Before January 26, 1992 Facilities built before January 26, 1992, are referred to as “pre-ADA” facilities.25 If there is an architectural barrier to accessibility in a pre-ADA facility,...
-
The Americans with Disabilities Act
physical changes to their stores or places of business to provide accessibility to wheelchair users and other people with disabilities, the ADA has requirements for existing facilities built...
-
Scenario 8 – Accessibility
The school was built in the early 1960s and, due to limited resources, the district has never altered the building....
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
11B-302.2 Carpet
However, if floor mats are built-in as part of new construction or alterations, and are part of an accessible route, they must comply with the accessibility provisions of this section and...
-
STEP 3
Table 240.2.1.2 requires a minimum of 1....
- Savaria Orion LU/LA Elevator Video
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
Location and Size
The side rails are similar in shape to grab bars and are located on each of the long sides of the table....
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
- Steelcase Series 5 Height-Adjustable Work Surface
-
Ceiling Mounted Lifts
These lifts require no extra maneuvering space in the room adjacent to the exam table and require little storage space....
-
F224.4 Guest Rooms with Communication Features
In transient lodging facilities, guest rooms with communication features complying with 806.3 shall be provided in accordance with Table F224.4....
-
407.4.7.1.3 Symbols
The control button for the emergency stop, alarm, door open, door close, main entry floor, and phone, shall be identified with tactile symbols as shown in Table 407.4.7.1.3....
-
407.12.3.2.1 Height (Section-by-Section Analysis)
407.12.3.2.1 Height (Section-by-Section Analysis) This section, presented in tabular form (Table 407.12.3.2.1), proposes alternative maximum heights for operable parts with obstructed...
-
225 Storage
Where more classes of spaces are provided than the number required to be accessible, the number of spaces shall not be required to exceed that required by Table 225.3....
-
224.4 Guest Rooms with Communication Features
In transient lodging facilities, guest rooms with communication features complying with 806.3 shall be provided in accordance with Table 224.4....