In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
Search Results "Flush Control"
-
11B-608.5.3 Alternate roll-in type shower compartments
-
Issue 7: Repair/replacement (put it back right!)
After reinstallation, the APS was turned 90 degrees from its prior placement, and the tactile arrow was no longer pointing at the street the pushbutton controlled....
-
Utility and Sewage Hookups [1011.2, 1011.3, and 1011.6]
At utility hookups, such as electrical service, water, cable or Internet connections, in camping units with mobility features and at sewage hookups in dump stations, a minimum of...
- Symmons Allura® Tub/Hand Shower System S-4704
- Speakman Versatile Handheld Shower System SM-5060
- American Standard FloWise® Commercial Shower System Kit
-
Operation
The controls and operating mechanisms must be unobstructed when a lift is in use....
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
- Figure 608.5.2 Standard Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
-
11B-407.2.1 Call controls
[2010 ADA Standards] 407.2.1 Call Controls. Where elevator call buttons or keypads are provided, they shall comply with 407.2.1 and 309.4. Call buttons shall be raised or flush....
-
11B-407.2.1 Call controls
[2010 ADA Standards] 407.2.1 Call Controls. Where elevator call buttons or keypads are provided, they shall comply with 407.2.1 and 309.4. Call buttons shall be raised or flush....
- Wikk Industries Inc. Bollard With Push Plate PART# BPS SM PRP36 CL (628)
- Wikk Industries Inc. Bollard With Push Plate PART# BPS SM TUBE 32D (630)
-
Phones
Phones Permanently installed telephones must be equipped with a volume control....
-
Verify Electrical
Measure to top or bottom of boxes 11B-308.1.2 Alarm/detector systems. 11B-702 Height of HVAC controls....
-
Verify Electrical
Measure to top or bottom of boxes 11B-308.1.2 Alarm/detector systems. 11B-702 Height of HVAC controls....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, operable parts of controls and faucets shall be installed on the side wall of the compartment adjacent to the seat wall 19 inches (483 mm)...
- BTX Intelligent Fashion Motorized Roller Shades
- BTX Intelligent Fashion Tumo Drapery System
-
§382.57(c)(6) Input
(6) Input. Input devices must comply with paragraphs (c)(6)(i) through (iv) of this section.
-
§382.57(c)(6)(iv)(B) Tactile symbols
(B) Tactile symbols. Function key surfaces must have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised...
-
§382.57(c)(7)(ii) Characters
(ii) Characters. Characters displayed on the screen must be in a sans serif font. Characters must be 3/16 inch (4.8 mm) high minimum based on the uppercase letter “I.” Characters...
-
§382.57(c)(6)(iii) Numeric keys
(iii) Numeric keys. Numeric keys must be arranged in a 12-key ascending or descending keypad layout or must be arranged in a row above the alphabetic keys on a QWERTY keyboard. The...
-
Voting Area
The accessible voting area must have an accessible entrance and adequate circulation and maneuvering space for voters who use wheelchairs or scooters, or who walk with mobility...