EXCEPTION: The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1½ inches (38 mm) minimum....
Search Results "Flush Control"
Filters
Commonly Searched Documents
-
609.3 Spacing
-
DEL Motorized Solutions Motorized Rolling Shades
Control Options: IR (Infrared) IR systems are a great solution for large or total home projects. These systems have the option of wired and wireless controls....
-
§ 1194.23(k)
(k) Products which have mechanically operated controls or keys, shall comply with the following:...
-
11B-608.6 Shower spray unit and water
The shower spray unit shall have an on/off control with a non-positive shut-off....
-
11B-812.10.2 Operable parts
Operable parts and charging cord storage shall comply with Section 11B-309.
-
608.5.2 Standard Roll-In Type Shower Compartments
In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
Scoping [4.1.3(13)]
Controls and operating mechanisms intended for use only by employees for job-related tasks are not required to comply (although compliance will help accommodate employees)....
-
Section H: Lifts
(§§410.3, 305.3) H4 Are the controls for the lift no higher than 48"?...
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, operable parts of controls and faucets shall be installed on the back wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
11B-609.3 Spacing
Exceptions: The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1½ inches (38 mm) minimum....
-
Symmons Allura® Tub/Hand Shower System S-4704
Symmons Allura® tub/shower system with lever handle and secondary integral volume control handle. Symmons Temptrol Pressure-Balancing mixing valve....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
Speakman Versatile Handheld Shower System SM-5060
The Speakman SentinelPro Shower Valve line is a dual element thermostatic and pressure balance shower valve line designed to provide high quality anti-scald protection. Speakman...
-
American Standard FloWise® Commercial Shower System Kit
Commercial shower system kits make life easier for specifiers to create complete shower systems without the hassle of selecting different components. Complete commercial shower...
-
Issue 7: Repair/replacement (put it back right!)
After reinstallation, the APS was turned 90 degrees from its prior placement, and the tactile arrow was no longer pointing at the street the pushbutton controlled....
-
Utility and Sewage Hookups [1011.2, 1011.3, and 1011.6]
At utility hookups, such as electrical service, water, cable or Internet connections, in camping units with mobility features and at sewage hookups in dump stations, a minimum of...
-
Figure 608.5.2 Standard Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
-
Operation
The controls and operating mechanisms must be unobstructed when a lift is in use....
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
Wikk Industries Inc. Bollard With Push Plate PART# BPS SM PRP36 CL (628)
There are entrances where mounting a wall switch and access controls directly to the wall adjacent to the door is impractical in terms of accessibility guidelines....
-
Wikk Industries Inc. Bollard With Push Plate PART# BPS SM TUBE 32D (630)
There are entrances where mounting a wall switch and access controls directly to the wall adjacent to the door is impractical in terms of accessibility guidelines....
-
11B-407.2.1 Call controls
[2010 ADA Standards] 407.2.1 Call Controls. Where elevator call buttons or keypads are provided, they shall comply with 407.2.1 and 309.4. Call buttons shall be raised or flush....
