Table 10 shows the surface materials recommended by region and surface composition....
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
III. Results of the Study
-
F206.2.1 Site Arrival Points
shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building...
-
Section 4.26.4
• Section 4.26.4 of the 1991 Standards requires handrail gripping surfaces to have edges with a minimum radius of 1/8 inch....
-
Designed and Constructed for First Occupancy (Preamble, Section-by-Section Analysis)
Designed and Constructed for First Occupancy According to paragraph (a)(2), a facility is subject to the new construction requirements only if a completed application for a building permit...
-
Designed and Constructed for First Occupancy (Section-By-Section Analysis and Response to Comments)
Section-By-Section Analysis and Response to Comments) According to paragraph (a)(2), a facility is subject to the new construction requirements only if a completed application for a building...
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
noise dampening device Key Specifications Floor to Floor Movement: +/- 25, +/- 50% Joint width: 4"-12" Optional vapor barrier Optional fire...
-
403.6 Handrails
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
-
403.6 Handrails
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
-
403.6 Handrails
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with 505. Advisory 403.6 Handrails....
-
11B-403.6 Handrails
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with Section 11B-505. [2010 ADAS] Advisory 403.6 Handrails. ...
-
11B-403.6 Handrails
Where handrails are provided along walking surfaces with running slopes not steeper than 1:20 they shall comply with Section 11B-505. [2010 ADAS] Advisory 403.6 Handrails....
-
2.1 Q. If a building includes three residential dwelling units and one or more commercial spaces, is the building a covered multifamily dwelling under the Fair Housing Act?
Covered multifamily dwellings are buildings consisting of four or more dwelling units, if such buildings have one or more elevators; and ground floor dwelling units in other buildings consisting...
-
General: ADA Standard Section 207.1
Section 207.1 of the ADA Standards covers information on scoping requirements for accessible means of egress in the most current ADA Standards.
-
Tile Tech Pavers® Stamp-Tech™ Series Pavers
Its irregular top surface was developed from actual sections of stone. By rotating the direction of the pavers during installation the natural effect is complete....
-
503.4 Floor and Ground Surfaces
503.4 Floor and Ground Surfaces. Vehicle pull-up spaces and access aisles serving them shall comply with 302....
-
3. If I comply with the California accessibility requirements, am I in compliance with ADA?
Remember that the accessibility requirements are reviewed by the building department only when a project is submitted for permit (meaning when you design, construct, alter, remodel, add,...
-
Slope [1013.3]
When the surface of tent pads, tent platforms, and clear ground spaces is constructed of materials other than asphalt, concrete, or boards, the surface must be no steeper than 1:48 (2 percent...
-
Subpart F -- Certification of State Laws or Local Building Codes
Subpart F -- Certification of State Laws or Local Building Codes...
-
206.2.1 Site Arrival Points
shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building...
-
Handrails Requirement
The handrail requirements in section 505 address specifications for continuity, height, clearance, gripping surface, cross section, fittings, and extensions....
-
11B-233.3.4.1 Alterations to vacated buildings
[2010 ADAS] 233.3.4.1 Alterations to Vacated Buildings. ...
-
11B-233.3.4.1 Alterations to vacated buildings
[2010 ADAS] 233.3.4.1 Alterations to Vacated Buildings. ...
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2....
