Mirror extends 4" (100mm) from wall at top and tapers to 1" (25mm) at bottom....
Search Results "Sand Bottom Pool"
-
Bobrick Fixed-Position Tilt Mirror B-293 1836
-
Bobrick Fixed-Position Tilt Mirror B-293 1830
Mirror extends 4" (100mm) from wall at top and tapers to 1" (25mm) at bottom....
-
AJW Architectural Products UJ16 Heavy Duty Hook
Top and bottom leading edges rounded to form a radius for safety. Overall Size: 1"W x 6 11/16"H x 2 1/8"D 25mm x 170mm x 54mm...
-
Hybrid Surface Systems
One site used an outdoor carpet (HYB-A) over engineered carpet padding infilled with silicone sand. ...
-
AJW Architectural Products U704 Series 16"W x 30"H Fixed Tilt Angle Frame Mirror - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame extends 4" at the top and tapers to 1" at bottom Multiple reflective surfaces available Mirror...
-
Pilot Rock CN-R/R Round Receptacle Perforated Steel
Specifications: Model CN-R/R Trash Receptacle is fabricated from a single piece of 14 ga. perforated steel (round holes) and reinforced with 10 ga. top and bottom rings and die formed...
-
Pilot Rock CN-R/D Trash Receptacle
Specifications: Model CN-R/D Trash Receptacle is fabricated from a single piece of 3/4-#9 expanded steel (diamond holes) and reinforced with 10 ga. top and bottom rings and die formed...
-
NABCO GT1175 All Glass Sliding Door
The low-profile bottom rail allows a larger, unobstructed view that’s perfect for enhancing an attractive lobby or well-manicured grounds....
-
Waterless Co. Urinal Borrego 2103
All wall drain units have a closed urinal bottom to avoid vandalism. No need to buy separate costly bottom covers. All of our urinals have a full 2” interior drain line....
-
Ramps
Interior and exterior ramps must not be too steep and must have a level landing at the bottom and top, and where the ramp changes direction....
-
1136A.1 Receptacle heights
communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom...
-
Ground-Level Play Components
Ground-level play components may be part of a composite structure (above, top) or may also be free-standing in a play area (above, bottom)....
-
B. Slopes
[ADA Stds. 4.8.2] Yes __ No __ N/A __ Comments: ___________________________________________ ...do the interior ramps have top, middle and bottom landings that are level and at least...
-
Temporary Solutions for Election Day
If the protruding object can be moved, lower the object so its bottom is within the cane-detectable area (not more than 27 inches above the floor)....
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids
Ramps must also have edge protection to stop wheelchairs from falling off the sides, and level landings at the top and bottom of each segment and where a ramp changes direction....
-
Signage [4.6.4]
A height of at least 60 inches (measured to the bottom edge) is generally advisable (taking care not to make the sign a protruding object), although a higher height is better for signs at...
-
2. b. ii. Accessible Door Hardware
Hardware required for accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor. xv Figure 14 and 15 (top and bottom left) Non-accessible door...
-
R306.3.1 Separation
Where chains, fencing, or railings are used for edge treatment, they shall have a bottom edge 380 mm (15 in) maximum above the sidewalk. Advisory R306.3.1 Separation....
-
Car Controls [4.10.12]
placement of raised and Braille characters) emergency controls are not required by ADAAG but are addressed by the elevator code; where they are provided, they must be grouped at the bottom...
-
Features of Accessible Parking Spaces
Parking space identification sign with the international symbol of accessibility complying with 703.7.2.1 mounted 60 inches minimum above the ground surface measured to the bottom of the...
-
Identification [§216.5, §502.6]
Signs must be at least 60” high measured to the bottom edge so that they are visible while vehicles are parked in a space....
-
1136A.1 Receptacle heights
communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom...
-
11B-405.7.5 Doorways
. ◼ ETA Editor's Note Since the 2010 ADA Standards makes no distinction between top, bottom, and intermediate landings, CBC is more stringent regarding ramp landings....
-
11B-809.12 Electrical receptacles, controls and switches
be located as follows: Where there is no obstruction, 48 inches (1219 mm) maximum measured from the top of the receptacle box and 15 inches (381 mm) minimum measured from the bottom...
