Search Results "MDE: Medical Diagnostic Equipment"

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-208.2.1 Hospital outpatient facilities

  The term "outpatient facility" is not defined in this code but is intended to cover facilities or units that are located in hospitals and that provide regular and continuing medical treatment...

• Links > Federal Department or Agency
  The Impact of the Affordable Care Act on People with Disabilities: A 2015 Status Report
  

  The Patient Protection and Affordable Care Act (ACA) is especially important to people with disabilities who often rely on a broad range of health care services and supports and are...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.5 Surface Hazards

  Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2 Transfer Supports

  Transfer supports shall comply with M305.2.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4 Transfer Supports

  5.4 Transfer Supports.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.4 Transfer Supports Recommendations

  5.4 Transfer Supports Recommendations

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M305.2 Transfer Supports

  Transfer supports shall comply with M305.2.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  M301.4 Lift Compatibility

  Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....

• Federal Documents > Technical Assistance > Enforcement Guidance: Reasonable Accommodation and Undue Hardship Under the Americans with Disabilities Act
  21. How should an employer handle leave for an employee covered by both the ADA and the Family and Medical Leave Act (FMLA)?

  ., additional leave, part-time schedule, job restructuring, or use of specialized equipment)....

• Webinars, Videos, and Training > Product Demonstration or Information
  CPF Challenge: 7 Minute Workout OFFICIAL TRAILER (2017)
  

  The CPF Challenge: 7 Minute Workout is designed to raise your pulse, raise awareness of CP, and raise dollars for the Cerebral Palsy Foundation's powerful and transformative...

• Federal Documents > Technical Assistance > Appendix to 29 CFR Part 1630—Interpretive Guidance on Title I of the Americans With Disabilities Act
  Section 1630.14(b) Employment Entrance Examination

  Section 1630.14(b)   Employment Entrance Examination An employer is permitted to require post-offer medical examinations before the employee actually starts working....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.2.1 End Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.4.1 Circular Cross Section

  Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.1.2 Side Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.1.1 End Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.2.2 Side Transfer Supports

  Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-805.4.1 Beds, exam tables, procedure tables, gurneys and lounge chairs

  A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of beds, exam tables, procedure tables, gurneys and lounge chairs. Exception:...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-805.4.1 Beds, exam tables, procedure tables, gurneys and lounge chairs

  A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of beds, exam tables, procedure tables, gurneys and lounge chairs. Exception:...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-805.4.1 Beds, exam tables, procedure tables, gurneys and lounge chairs

  A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of beds, exam tables, procedure tables, gurneys and lounge chairs. Exception:...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  3.2 MDE Advisory Committee Process

  3.2 MDE Advisory Committee Process The MDE Advisory Committee met six times (two days/meeting) in person at the U.S....

• Links > Travel/Recreation
  Invictus Games Foundation
  

  The Invictus Games use the power of sport to inspire recovery, support rehabilitation and generate a wider understanding and respect for wounded, injured and sick Servicemen and...

• Federal Documents > Standards > 36 CFR Part 1194 Electronic and Information Technology Accessibility Standards (Section 508 Standards)
  § 1194.23(i)

  (i) Interference to hearing technologies (including hearing aids, cochlear implants, and assistive listening devices) shall be reduced to the lowest possible level that allows a user...

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1194 - Proposed Information and Communication Technology (ICT) Standards and Guidelines NPRM - Preamble
  SUMMARY OF PRELIMINARY REGULATORY ANALYSIS

  and customer premises equipment of ensuring that that their respective websites and electronic support documentation conform to accessibility standards, including WCAG 2.0....