A minimum clear space of 3/8 inch (9.5 mm) or other suitable means of separation shall be provided between rows of control buttons....
Search Results "Clear Floor Area"
Filters
Commonly Searched Documents
-
11B-407.4.7.1.5 Button spacing
-
206.2.6 Performance Areas
206.2.6 Performance Areas....
-
403.2 Floor or Ground Surface
403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302....
-
206.2.6 Performance Areas
Where a circulation path directly connects a performance area to an assembly seating area, an accessible route shall directly connect the assembly seating area with the performance area....
-
F206.2.6 Performance Areas
Where a circulation path directly connects a performance area to an assembly seating area, an accessible route shall directly connect the assembly seating area with the performance area....
-
§ 38.59 Floor surfaces
Floor surfaces on aisles, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
B. Accessible Routes To All Service/Activity Areas
Accessible Routes To All Service/Activity Areas Everyone must be able to get to each of the various areas where activities and services take place....
-
307.5 Required Clear Width
307.5 Required Clear Width. Protruding objects shall not reduce the clear width required for accessible routes....
-
Areas of Refuge (Preamble, Section-by-Section Analysis)
- Areas of refuge (areas with direct access to a stairway, and where people who cannot use stairs may await assistance during a emergency evacuation) will be required, as proposed, but the...
-
11B-604.3.2 Overlap
clearance around the water closet shall be permitted to overlap the water closet, associated grab bars, dispensers, sanitary napkin disposal units, coat hooks, shelves, accessible routes, clear...
-
11B-302.2 Carpet
Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge. Carpet edge trim shall comply with Section 11B-303....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
806.2.1 Living and Dining Areas
806.2.1 Living and Dining Areas. Living and dining areas shall be accessible....
-
11B-403.5 Clearances
Exception: Within employee work areas, clearances on common use circulation paths shall be permitted to be decreased by work area equipment provided that the decrease is essential to the...
-
11B-802.1.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
Section 35.151(g) Assembly areas
Section 35.151(g) Assembly areas In the NPRM, the Department proposed Sec. 35.151(g) to supplement the assembly area requirements of the 2004 ADAAG, which the Department is adopting as...
-
Definition of "Assembly Area"
It was suggested that the definition of "assembly area" should more clearly address the types of facilities covered....
-
1.6.17 Sterile Area.
1.6.18 Sterile Area....
-
405.5 Clear Width
405.5 Clear Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 36 inches (915 mm) minimum....
-
Viewing Areas
[See subsections ...]
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work surface,...
-
Visiting Areas: ADA Standard Section 232.5
Section 232.5 covers scoping requirements in the current ADA Standards for visiting areas.
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....