The transition from roadway or sidewalk and the transition from vehicle floor to the ramp may be vertical without edge treatment up to 1/4 inch (6.5 mm)....
Search Results "Vehicle Pull-Up Space"
-
§ 38.159(c)(3) Ramp threshold
-
Rockwood Manufacturing Company 215 Tapered Door Pull 16"
Options: • Use Y prefix (Y215) when ordering pulls with base plates, Y plate diameter is 1-1⁄16"; recommended for use on glass or wood doors....
-
Rockwood Manufacturing Company 215L Tapered Door Pull 28"
Options: • Use Y prefix (Y215) when ordering pulls with base plates, Y plate diameter is 1-1⁄16"; recommended for use on glass or wood doors....
-
§ 38.53(d)(2) Exception
New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
-
1011.2.1 Size and Location
another clear ground space....
-
Diversified Woodcrafts ADA Instructor's Desk 1216K-L-ADA
The knee space is wide enough for a wheel chair to fit into the space. The 34" H meets ADA requirements....
-
Overlap: ADA Standard Section 604.3.2
Section 604.3.2 covers the current ADA Standards for overlapping clearances in the water closet clear floor space.
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided....
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided....
-
309.2 Clear Floor Space
A clear floor or ground space complying with 305 shall be provided. ...
-
§ 38.23(d)(2) Location and size
the seat overhanging the space....
-
§ 38.159(b)(2)(ii) Exception
Where the lift is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary lift”), the requirements...
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
§ 36.304(b)(21)
(21) Installing vehicle hand controls....
-
Sec.36.304(b)(21)
(21) Installing vehicle hand controls....
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
Metal: T4 Back to Back and Concealed; Pull Free End = 6, Push Free End = 6, Common End = 5....
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
4.7.2 Controls and Operating Mechanisms
Controls and operating mechanisms shall comply with the operable parts requirements in sections 308 and 309.4 of the ABAAS. Exception 1. Water hydrants and water utility hookups...
