Accessible parking spaces for cars have at least a 60-inch-wide access aisle located adjacent to the designated parking space. The access aisle is just wide enough to permit a person...
Search Results "Seat Width"
-
Accessible Parking Spaces for Cars
-
C. Doors
described above: ...with the exception of doors at shallow closets, do the doors to required accessible spaces, and all doors into and within guestrooms allow at least 32" clear passage width...
-
R304.5.1.2 Shared Use Paths
In shared use paths, the width of curb ramps runs and blended transitions shall be equal to the width of the shared use path....
-
Spaces and Elements: ADA Standard Section 206.2.4
Section 206.2.4 covers the scoping requirements in the most current ADA Standards for accessible routes connecting spaces and elements within a building.
-
16.1 Q. Will a standard hung 32-inch door provide sufficient clear width to meet the requirements of the Fair Housing Act?
A. No, a 32-inch door would not provide a sufficient clear opening to meet the requirement for usable doors. A notation in the Guidelines for Requirement 3 indicates that a 34-inch...
-
12162(a)(2)(D)(iii)
(iii) have a seat to which a passenger in a wheelchair can transfer, or a space to fold and store such passenger's wheelchair; or...
-
12162(a)(2)(B)(iii)
(iii) have a seat to which a passenger in a wheelchair can transfer, and a space to fold and store such passenger's wheelchair; and...
-
11B-502.2 Vehicle spaces
Car parking spaces shall be 108 inches (2743 mm) wide minimum and van parking spaces shall be 144 inches (3658 mm) wide minimum, shall be marked to define the width, and shall have an adjacent...
-
Wheelchair Space or Transfer Seat or Transfer Device
Wheelchair Space or Transfer Seat or Transfer Device....
-
Line of Sight and Dispersion of Wheelchair Spaces in Assembly Areas
Section 4.33.3 also requires wheelchair spaces and companion seats to be dispersed in assembly areas with more than 300 seats....
-
§ 382.38 Seating accommodations
§ 382.38 Seating accommodations....
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum. EXCEPTION: Wheelchair spaces located on raised platforms shall be permitted to be 32 inches (815 mm) wide minimum to a...
-
Figure 404.2.3 Clear Width of Doorways – Drawing from the U.S. Access Board
-
Ticket Prices
Venues cannot charge higher prices for accessible seats than for non-accessible seats in the same seating section....
-
§ 38.153(c)(2) Exception
Where compliance with the door width requirement of paragraph (c)(1) of this section is not feasible, the minimum door width shall be 27 in (685 mm)....
-
§ 35.151(g)(1)
(1) Wheelchair and companion seating locations are dispersed among all levels of the facility that are served by an accessible route;...
-
11B-406.5.3 Landings
The landing clear width shall be at least as wide as the curb ramp, excluding any flared sides, or the blended transition leading to the landing....
-
Purchasing Multiple Tickets
People purchasing a ticket for an accessible seat may purchase up to three additional seats for their companions in the same row and these seats must be contiguous with the accessible seat...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7002
Three Knuckle - Full Mortise Swing Clear Hinge AB7002 - Concealed Anti-Friction Bearing - Standard Weight Description: - For beveled edge doors - ANSI A8122 -...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1260
Five Knuckle - Full Mortise Swing Clear Hinge BB1260 - Ball Bearing - Standard Weight Description: - ANSI A8122 - For square edge doors - Non-rising removable pin...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7511
Three Knuckle - Half Mortise Swing Clear Hinge AB7511 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For square edge doors - ANSI A8221 -...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7512
Three Knuckle - Half Mortise Swing Clear Hinge AB7512 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For beveled edge doors - ANSI A8221 -...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1261
Five Knuckle - Full Mortise Swing Clear Hinge BB1261 - Ball Bearing - Standard Weight Description: - ANSI A8122 - For beveled edge doors - Non-rising removable...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1263
Five Knuckle - Full Mortise Swing Clear Hinge BB1263 - Ball Bearing - Heavy Weight Description: - ANSI A8121 - For beveled edge doors - Non-rising removable pin...
