The slopes of beach access routes shall comply with 6.7.1 and 6.7.2...
Search Results "Slope"
Filters
Commonly Searched Documents
-
6.7 Slope
-
405.3 Cross Slope
405.3 Cross Slope. Cross slope of ramp runs shall not be steeper than 1:48. Advisory 405.3 Cross Slope....
-
1009.3.1 Sloped Entries
1009.3.1 Sloped Entries....
-
R407.2 Running Slope
R407.2 Running Slope. Ramp runs shall have a running slope between 5 percent minimum and 8.3 percent maximum. Advisory R407.2 Running Slope....
-
405.3 Cross Slope
Cross slope of ramp runs shall not be steeper than 1:48. Advisory 405.3 Cross Slope. Cross slope is the slope of the surface perpendicular to the direction of travel....
-
405.3 Cross Slope
Cross slope of ramp runs shall not be steeper than 1:48. Advisory 405.3 Cross Slope. Cross slope is the slope of the surface perpendicular to the direction of travel....
-
7. Exterior Ramp Running Slope
7. ...do the exterior ramps have running slopes of 1:12 or less (critical dimension of 2" or less)?...
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
FEATURES: Precise slope and angle measurements for metal fabricators, commercial carpenters, plumbers, etc......
-
R304.5.4 Counter Slope
R304.5.4 Counter Slope. The counter slope of the gutter or street at the foot of curb ramp runs, blended transitions, and turning spaces shall be 5 percent maximum....
-
1009.3.1 Sloped Entries
Sloped entries shall comply with Chapter 4 except as modified in 1009.3.1 through 1009.3.3....
-
1009.3.1 Sloped Entries
Sloped entries shall comply with Chapter 4 except as modified in 1009.3.1 through 1009.3.3....
-
Cross Slope [1017.7.2]
Cross slope is the side-to-side slope of a trail tread....
-
Section 2. Slope
"Slope" means the relative steepness of the land between two points and is calculated as follows: The distance and elevation between the two points (e.g., an entrance and a passenger loading...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages....
-
2.4 Slope
The running slope (grade) and cross slope of ORARs shall comply with section 2.4. ...
-
M-D Building Products, Inc. GEN3 SmartTool™ Digital Level
shows orientation for next step with the word “UP” Takes less than 2 minutes Five Instant Angle Conversion Modes Degrees - Machine set-up, pipe bending, saw set-up Percent Slope...
-
Tread Surface: ADA Standard Section 504.4
Section 504.4 covers the current ADA Standards for the tread surfaces on stairways.
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
3.2.4 Slope
The ground surface in all camp living areas shall have a slope of no more than 1:48 (2 percent) in any direction. Exception....
-
Slope : Intercept
This project, Slope : Intercept, is a networked architecture project, organized around the inclined plane....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
-
1016.7 Slopes
The slopes of outdoor recreation access routes shall comply with 1016.7....
