Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Right-hand seat....
Search Results "Shower Seat"
-
Bobrick Folding Shower Seat B-517
-
Bobrick Folding Shower Seat B-518
Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Left-hand seat....
-
11B-608.3.2 Standard roll-in type shower compartments
[2010 ADA Standards] 608.3.2 Standard Roll-In Type Shower Compartments....
-
1b
Do they have a fixed or folding seat between 17"-19" above the floor, onto which a person who uses a wheelchair may transfer to shower?...
-
Shower Spray Unit and Water: ADA Standard Section 607.6
Section 607.5 covers the current ADA Standards for bathtub shower spray units and the water temperature of the spray units.
-
Bobrick Reversible Folding Shower Seat B-5181
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended....
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
Healthcraft Invisia ADA Serenaseat™ Folding Shower Seat
Product Specification The shower seat shall have a Brazilian Walnut back rest and seating surface. The seating surface shall be 32"/81cm in width....
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
11B-608.5.2 Standard roll-in type shower compartments
In standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm...
-
American Specialties Folding Shower Seat 8208-R
FOLDING SHOWER SEAT 8208-R Similar to 8206, but seat is fabricated of stainless steel, satin finish, slatted design....
-
American Specialties Retractable Shower Seat 170
Seat folds up into cabinet. Fabricated of 12 gauge stainless steel, exposed surfaces have a satin finish. Seat has reinforced channels....
-
American Specialties Folding Shower Seat 8205-L
FOLDING SHOWER SEAT 8205-L (Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly....
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
11B-610 SEATS
[See subsections ...]
