Where water closets are provided, at least 5 percent but no fewer tan one shall comply with Section 11B-604. [2010 ADA Standards] 213.3.2 Water Closets. Where water closets are...
Search Results "Element"
2010 ADA Definition
Element: An architectural or mechanical component of a building, facility, space, or site.
-
11B-213.3.2 Water closets
-
Water Closets: ADA Standard Section 213.3.2
Section 213.3.2 covers scoping requirements in the current ADA Standards for water closets.
-
11B-213.3.2 Water closets
Where water closets are provided, at least 5 percent but no fewer tan one shall comply with Section 11B-604. [2010 ADA Standards] 213.3.2 Water Closets. Where water closets are...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing...
-
Element-by-element safe harbor for public accommodations. (Section-by-Section Analysis)
Element-by-element safe harbor for public accommodations....
-
Built-in Elements
BUILT-IN ELEMENTS Dining/work surfaces 11B-226, 11B-902.2 Benches 11B-903.2...
-
Built-in Elements
BUILT-IN ELEMENTS Dining/work surfaces 11B-226, 11B-902.2 Benches 11B-903.2...
-
Noncomplying new construction and alterations. (Section-by-Section Analysis)
The element-by-element safe harbor referenced in Sec. 36.304(d)(2) has no effect on new or altered elements in existing facilities that were subject to the 1991 Standards on the date that...
-
F244.2.3 Elements Within Camping Units with Mobility Features
Elements within camping units required to provide mobility features shall comply with F244.2.3....
-
F245.2.5 Elements Within Picnic Units with Mobility Features
Elements within picnic units required to provide mobility features shall comply with F245.2.5....
-
201 Application
In the proposed rule, the term "fixed" had been removed as a modifier of certain elements covered by the guidelines, such as tables and storage....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
11B-203.1 General
Sites, buildings, facilities, and elements are exempt from these requirements to the extent specified by 11B-203....
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
F244.2.3 Elements within Camping Units with Mobility Features
Where these elements are provided within a camping unit, at least one of each type of element is required to comply with the applicable technical requirements for the element....
-
4.1.6(1)(c)
(c) If alterations of single elements, when considered together, amount to an alteration of a space of a building or facility, the entire space shall be made accessible....
-
4.1.6(1)(c)
(c) If alterations of single elements, when considered together, amount to an alteration of a room or space in a building or facility, the entire space shall be made accessible....
-
§ 36.304(d)(2)(iii)
(iii) The safe harbor provided in §36.304(d)(2)(i) does not apply to those elements in existing facilities that are subject to supplemental requirements (i.e., elements for which there are...
-
LAVATORY
[DSA-AC] A fixed bowl or basin with running water and drainpipe, as in a toilet or bathing facility, for washing or bathing purposes. (As differentiated from the definition of...
-
SINK
[DSA-AC] A fixed bowl or basin with running water and drainpipe, as in a kitchen or laundry, for washing dishes, clothing, etc. (As differentiated from the definition of “Lavatory”.)
-
SINK
[DSA-AC] A fixed bowl or basin with running water and drainpipe, as in a kitchen or laundry, for washing dishes, clothing, etc. (As differentiated from the definition of “Lavatory”.)
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....