The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
Search Results "Cross Slope"
2010 ADA Definition
Cross Slope: The slope that is perpendicular to the direction of travel (see running slope).
-
Slope: ADA Standard Section 1002.4.2
-
Non-Circular Cross Sections: ADA Standard Section 505.7.2
Section 505.7.2 covers the current ADA Standards for the non-circular cross section of handrail gripping surfaces.
-
1.1.6 Flatness of walk cross slope
1.1.6 Flatness of walk cross slope....
-
Slope: ADA Standard Section 810.2.4
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48....
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48....
-
1.2.1 Walks and other non - ramp surfaces
When overall running slope for walks is measured according to Section 1.1.3 a recommended tolerance for running slope is +1%....
-
R404.2 Surfaces
Surfaces of clear spaces shall comply with R302.7 and shall have a running slope consistent with the grade of the adjacent pedestrian access route and cross slope of 2 percent maximum....
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
Cross slopes—the side-to-side slope of an outdoor recreation access route—must not exceed 1:33 (3 percent), as shown by figure 37....
-
Accessible Slopes
For the cross slope of an accessible route the maximum slope allowed is 1:48....
-
1991 / 1994 ADA Standards - Plan Review Tool - Slopes
1991 / 1994 ADA Standards - Plan Review Tool - Slopes Click here to view/download the pdf "1991 / 1994 ADA Standards - Plan Review Tool - Slopes" (354 KB) * * * * * * *...
-
1.2.2
When flatness of cross slope for an accessible surface other than a ramp is measured according to Section 1.1.6 at least 80% (rounded to the nearest whole number) of the measurements should...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages....
-
Step 3: Apply the Accessibility Provisions
This step involves looking at FSTAG, sections 7.4.1 through 7.4.8, which contain the technical requirements for trail grade, cross slope, resting interval, surface, clear tread width, passing...
-
Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
MARKED CROSSING
[DSA-AC] A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
MARKED CROSSING
[DSA-AC] A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
Slopes and Resting Intervals for Beach Access Routes
Running slope, also referred to as "grade," is the lengthwise slope of a beach access route, parallel to the direction of travel....
-
3 [§ 4.3.7]
3 [§ 4.3.7] The cross slope of the curb ramp is perpendicular to the running slope. Unlike the running slope, which runs along the ramp, the cross slope is measured across the ramp....
-
Running Slope
The slope that is parallel to the direction of travel (see cross slope)....
-
RUNNING SLOPE
[DSA-AC] The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
RUNNING SLOPE
[DSA-AC] The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
1.1.10 Ramps
Measure accessible ramps for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with Sections 1.1.11, 1.1.12, 1.1.13...
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....