id=com.dks_dlmanagerThe DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone...
Search Results "Vertical Access"
-
Door King Inc. 1515 Surface Mount Entry Keypad
-
6.0 BEACH ACCESS ROUTES
[See subsections ...]
-
Subpart D—Program Accessibility
[See subsections ...]
-
1991 ADA Standards for Accessible Design
Department of Justice 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities Excerpt from 28 CFR Part 36: ADA Standards for Accessible...
-
Exterior Routes
302.1 Openings in floor or ground surfaces 1/2 inch maximum with long dimension perpendicular to direction of travel. 11B-302.3 Vertical...
-
Exterior Routes
302.1 Openings in floor or ground surfaces 1/2 inch maximum with long dimension perpendicular to direction of travel. 11B-302.3 Vertical...
-
A. Exterior Routes
aids between... 1. ...the accessible parking space access aisles (both guest and employee parking areas) and an accessible entrance door to each building?...
-
502.3.3 Marking
Access aisles shall be marked so as to discourage parking in them. Advisory 502.3.3 Marking....
-
502.3.3 Marking
Access aisles shall be marked so as to discourage parking in them. Advisory 502.3.3 Marking....
-
Valet Parking and Mechanical Access Parking Garages
Valet Parking and Mechanical Access Parking Garages....
-
Bobrick 18" Straight Grab Bar Peened B-6806.99 x 18
18" (455mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
-
Bobrick 18" Straight Grab Bar B-5806 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 18" Straight Grab Bar Peened B-5806.99 x 18
18" (455mm) long, 1-1/4" (32mm) dia. tubing , peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick 18" Straight Grab Bar B-6806 x 18
18" (455mm) long, 1-1/2" (38mm)dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Delta 1-1/2″ x 18″ ADA Grab Bar, Concealed Mounting 40118-PS
Product Features and Benefits 18″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...
-
Emergency Transportable Housing: ADA Standard Section 3.
Access to such housing was found to be problematic in the aftermath of hurricanes Katrina and Rita in 2005....
-
Parking Structure Entrances: ADA Standard Section 206.4.2
Section 206.4.2 covers scoping requirements in the most current ADA Standards for accessible routes to accessible routes to parking structure entrances.
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm)...
-
11B-609.3 Spacing
11B-609.3 Spacing. The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½...
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm)...
-
ADAAG: ADA Standard Section 2004
This of the ADA Standards covers the definition of the 2004 ADDAG.
-
Van Parking Spaces: ADA Standard Section 208.2.4
Section 208.2.4 covers scoping requirements in the current ADA standards for van accessible parking spaces.
-
[ADA Title III §36.104] 2004 ADAAG
[ADA Title III §36.104] 2004 ADAAG means the requirements set forth in appendices B and D to 36 CFR part 1191 (2009).
-
[ADA Title II §35.104] 2004 ADAAG
[ADA Title II §35.104] 2004 ADAAG means the requirements set forth in appendices B and D to 36 CFR part 1191 (2009).
