As a standard , we believe the increased access goal is well met by having a 19 inch minimum height and transfer height adjustability....
Search Results "Shoulder Height"
Filters
Commonly Searched Documents
-
II. Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height
-
2.2.3 Functional Reach
Those individuals unable to grasp and/or lift any of the cylinders above shoulder height did not complete the reaches....
-
Zurn Z5560 Commercial EcoVantage Elongated Toilet ADA Height
Pressure assist tank High performance EcoFlushTM technology Easy touch pneumatic handle actuation Ultra quiet flush Siphon jet flush action ADA height...
-
California Department of Managed Health Care - Physical Access to Health Care Fact Sheet
If You Use a Wheelchair or Have a Hard Time Walking
-
1011.5.2 Riser height and tread depth
... Exceptions: 4. See California Fire Code Chapter 11 and California Existing Building Code for the replacement of existing stairways. [DSA-AC] For applications listed in...
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
Stainless Steel Sanitary Napkin Receptacle, 11" Height, 1 EA Item# 1ECK9 Mfr....
-
Caroma® USA Somerton Smart 270 Easy Height Elongated Toilet
A modern concept close coupled 1.28/0.8 gpf (4.8/3 lpf), Somerton Smart 270 Easy Height Elongated dual flush washdown toilet installation designed to provide a seat height of between 17”...
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
1136A.2 Switch and control heights
1136A.2 Switch and control heights. ...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in...
-
Caroma® USA Sydney Low Profile 270 Easy Height Elongated Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Sydney Low Profile 270 Easy Height Elongated dual flush high efficiency toilet (HET) designed to provide a seat height of between 17" to...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
7 Acromion* Heights: Height of Shoulder, Acromial Height, sitting Length/Depth: Length of Clavicle (with sternal notch) JCR: Possible Shoulder JCR 8...
-
1132A.3 Width and height of interior doors and secondary exterior doors
1132A.3 Width and height of interior doors and secondary exterior doors. Doors shall comply with the following:...
-
Companion Seats
If the ride has shoulder-to-shoulder seating, the companion seating must be shoulder-to-shoulder with the adjacent wheelchair space....
-
M305 Supports
[See subsections ...]
-
Features of Accessible Exam Tables
Features of Accessible Exam Tables 1. Removable/adjustable support rails with continuous gripping surfaces 2. 30” X 48” minimum clear floor space adjacent to exam table and...
-
M305 Supports (Section-by-Section Analysis)
M305 in the final rule provides the technical requirements for transfer supports, standing supports, leg supports, and head and back supports. Transfer supports are required for...
-
4.34.6 KITCHENS
Accessible or adaptable kitchens and their components shall be on an accessible route and shall comply with the requirements of 4.34.6.
-
M305 Supports
[See subsections ...]
-
Clear Floor or Ground Space [4.31.2], Mounting Height [4.31.3]
Clear Floor or Ground Space [4.31.2], Mounting Height [4.31.3] Generally, access can be provided with either a forward or side approach....
-
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS In the absence of Committee consensus commending a departure from the existing broadly accepted transfer surface...
-
1100KG HR Digital Platform Scale Extra Wide Handrail with Mechanical Height Rod
Also included is a mechanical height rod allowing users to measure weight and height together. ...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
