Handrails are not required on curb ramps. Handrails shall comply with 4.26 and shall have the following features: (1) Handrails shall be provided along both sides of ramp segments....
Search Results "Curb Cut"
Filters
Commonly Searched Documents
-
4.8.5* HANDRAILS
-
Location
An accessible route never has curbs or stairs, must be at least 3- feet wide, and has a firm, stable, slip-resistant surface....
-
Location
An accessible route never has curbs or stairs, must be at least 3- feet wide, and has a firm, stable, slip-resistant surface....
-
Fur out the wall
Don't cut the concrete or flooring or move plumbing. Just need to make sure all other clearances, (42" from center line to adjacent wall/fixture is clear, etc.) ...
-
Use color and design to create architectural landmarks to aid in spatial orientation (slides 8 – 10)
To the right of that and cut off the [slide] is the list of departments and a dot with the corresponding color to the location on the map....
-
Atlantis Railing
The bump rail option should always be considered when there is no curb on the ramp. Our design standards are easily modified to meet custom requirements....
-
BTX Intelligent Fashion Motorized Drapery Systems
Reliable design and cutting-edge innovation has made BTX the cornerstone of motorized drapery systems for the hospitality industry....
-
American Specialties 9012 Surface Mounted Baby Changing Station
Using mounting dimension on cut sheet diagram will result in knee clearance under the unloaded bed tray, after installation, of 27" to 27-3/8" [686 to 695] and the rim of the changing table...
-
Hadrian Inc. Gladiator Athletic Lockers
Durable Powder Coated Finish Gladiators have the same durable, thick and even powder coated finish as Emperor lockers with the same wide array of cutting edge colors....
-
Interface Human Nature Collection HN820 Carpet Tiles
Product Specifications Overview Product Construction Tufted Cut & Loop Yarn Manufacturer Aquafil Yarn System 100%...
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
218 and 810 Transportation Facilities
The 1991 Standards at sections 4.1.3(15), 4.7.7, 4.29.2, 4.29.5, 4.29.6, and 10.3.1(8) require detectable warnings at curb ramps, hazardous vehicular areas, reflecting pools, and transit...
-
A. The Substantive Legal Dispute
allege that Defendants City of Los Angeles (“the City” or “Defendant”) unlawfully failed, and are failing, to properly install and maintain accessible pedestrian rights of way, including curb...
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
These edited Proceedings are based on notes by JEW and TOS, and slides that accompanied the presentation) Exterior Considerations (slides 2 and 3) Contrast is needed at ramps & curbs...
-
E. Chapter 4: Boarding and Alighting
revise the technical requirements for the slope of ramps in non-rail vehicles by specifying a single standard (1:6) for maximum running slope applicable to ramps deployed to roadways or curb-height...
-
Section 810.2.2
., there is less than 96 inches of perpendicular space available from the curb or roadway edge, because of buildings or terrain features)....
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum....
-
Accessible Parking
Install curb ramp where an accessible route crosses a curb - note: curb ramp does not extend into the access aisle....
-
First Victory
By insisting on a combination of tax cuts and vast increases in military spending, President Reagan was able to force a reduction in federal, domestic expenditures....
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar. All exposed welds ground and polished to blend....
-
SafePath BigHorn™ Ramps
Safest surface in threshold design, much safer than aluminum Peel-and-stick tape for immediate installation Perfect for wheelchairs, scooters and electric chairs Can be vertically cut...
-
AJW Architectural Products UG120-U Series UG120-U 29" Swing-Up, 1.25" Diameter Grab Bar - Configuration U
(Anti-slip) Intermediate Supports: Same material as bar with contour cuts that are heliarc welded....
-
Pilot Rock Square Frame Square Table - Series TQ703
Model TQ703 Picnic Tables are square tables designed with clean-cut square end frames and inlaid top and seat planks. Model TQ703 tables have 3 full length bench seats....
