The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
Search Results "Angled Parking"
-
11B-404.3.1 Clear width
-
Addendum C: Participant responses to two step transfers for protocols D and E
Transfer/Avoid Felt more comfortable transferring to a direct vertical height instead of the angled transfer....
-
1132A.3 Width and height of interior doors and secondary exterior doors
Swinging doors shall provide a net clear opening width of not less than 32 inches (813 mm), measured with the door or doors positioned at an angle of 90 degrees from the closed position....
-
2013 & 2016 CBC Answer
Based on the attached diagram, the accessible parking and its access aisle are adjacent to another parking space; therefore the width measurement shall be taken from centerline of the markings...
-
Mammography Equipment
Accessible Mammography Machine 1.Unit pivots to multiple angles and adjusts in height for seated patients. 2.It is best to position equipment to allow both front and side approaches...
-
DRIVE AISLE
A vehicular way provided within a parking facility that connects vehicular entrances, parking stalls, electric vehicle charging stations, passenger loading zones, and vehicular exits....
-
DRIVE AISLE
A vehicular way provided within a parking facility that connects vehicular entrances, parking stalls, electric vehicle charging stations, passenger loading zones, and vehicular exits....
-
DRIVEWAY
A vehicular way providing access between a public way and a building, parking facility, or other off-street area. A driveway may provide access to drive aisles in a parking facility....
-
DRIVEWAY
A vehicular way providing access between a public way and a building, parking facility, or other off-street area. A driveway may provide access to drive aisles in a parking facility....
-
Treads and Risers [4.9.2], Nosings [4.9.3]
Angled or rounded nosings or sloped risers help prevent this hazard and provide a smoother transition. Straight risers without nosings are acceptable....
-
Clear space
The angle the WMD was positioned with respect to the transfer station was measured from the front edge of the platform as shown in Figure 2....
-
4.9.3 Nosings
Risers shall be sloped or the underside of the nosing shall have an angle not less than 60 degrees from the horizontal....
-
4.9.3 NOSINGS
Risers shall be sloped or the underside of the nosing shall have an angle not less than 60 degrees from the horizontal....
-
Amusement Attraction
Any facility, or portion of a facility, located within an amusement park or theme park which provides amusement without the use of an amusement device....
-
Lines of Sight for Wheelchair Spaces
viewing angle (221.2.3.2, Exception 1)....
-
11B-221.6 Semi-ambulant seats
i) It is located within the rear 60% of the seats provided in an auditorium; or i) It is located within the area of an auditorium in which the vertical viewing angles...
-
11B-221.6 Semi-ambulant seats
i) It is located within the rear 60% of the seats provided in an auditorium; or i) It is located within the area of an auditorium in which the vertical viewing angles...
-
AMUSEMENT ATTRACTION
[DSA-AC] Any facility, or portion of a facility, located within an amusement park or theme park which provides amusement without the use of an amusement device....
-
AMUSEMENT ATTRACTION
[DSA-AC] Any facility, or portion of a facility, located within an amusement park or theme park which provides amusement without the use of an amusement device....
-
221.2.3.2 Vertical Dispersion
Vertical dispersion shall not be required in assembly areas with 300 or fewer seats if the wheelchair spaces provide viewing angles that are equivalent to, or better than, the average viewing...
-
Armor-Tile Tactile Systems Surface Applied Systems
supplied; tile, adhesive, fasteners, sealant beveled edges for smooth transition meeting ADA requirements light weight and easy to handle easily cut to conform to angled...
-
R408.5 Nosings
Risers shall be permitted to slope under the tread at an angle of 30 degrees maximum from vertical....
-
Maneuvering Clearances at Doors [4.13.6]
Maneuvering through doors is often done on an angle, particularly at doors with closers, and the minimum space required is also dependent on how the door may be approached....
-
11B-504.5 Nosings
Risers shall be permitted to slope under the tread at an angle of 30 degrees maximum from vertical....
