EVCS complying with Section 11B-812 that serve a particular building or facility shall be located on an accessible route to an entrance complying with Section 11B-206.4....
Search Results "Access Control"
-
11B-812.5.1 Accessible route to building or facility
-
11B-812.5.1 Accessible route to building or facility
EVCS complying with Section 11B-812 that serve a particular building or facility shall be located on an accessible route to an entrance complying with Section 11B-206.4....
-
How are parking spaces and access aisles to be marked?
The ADA Standards do not specify the method or color of parking space and access aisle markings. State or local codes and regulations may specify such markings....
-
Sharing an Access Aisle
Requirements for access aisles in section 502.3 address width, length, marking, and location. Two spaces are permitted to share an access aisle....
-
27.1 Q. Do the Guidelines set any requirements for the type or location of bathtub controls?
In that case, while the type of control is not specified, the control must be located as shown in Figure 8 of the Guidelines. ...
-
Access Aisle
An accessible pedestrian space between elements, such as parking spaces, seating, and desks, that provides clearances appropriate for use of the elements....
-
ACCESS AISLE
An accessible pedestrian space between elements, such as parking spaces, seating, and desks, that provides clearances appropriate for use of the elements....
-
Issue 6: Pre-timed signals (an APS is more than a pushbutton)
The pushbutton locator tone in a pushbutton-integrated APS provides access to other information provided by the APS unit: the vibrotactile WALK; the tactile arrow for wayfinding; tactile...
-
What terms will let people know whether our facility is accessible?
You've probably heard incorrect or imprecise terms such as "partially accessible," "accessible with assistance," "ADA accessible," "handicapped accessible," and "barrier-free." ...
-
11B-503.3.3 Marking
Access aisles shall be marked with a painted borderline around their perimeter....
-
11B-503.3.3 Marking
Access aisles shall be marked with a painted borderline around their perimeter....
-
Section 36.211 Maintenance of accessible features (Section-by-Section Analysis)
Section 36.211(a) broadly covers all features that are required to be accessible under the ADA, from accessible routes and elevators to roll-in showers and signage. ...
-
11B-407.4.7.2 Keypads
ETA Editor's Note The preceding CBC requirements for elevator controls at 11B-407.4.6 and 11B-407.4.7 are more stringent than those of 2010 ADA Standards....
-
Access Board: Bathtubs
Access Board. View the animation video in its entirety on the Access Board's website here: https://www.access-board.gov/images/videos/bathing-captioned.mp4...
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308.
-
M307.3 Operation
Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist.
-
M307.1 General
Operable parts for patient use shall comply with M307.
-
M307.1 General (Section-by-Section Analysis)
This is an introductory section.
-
M307.3 Operation (Section-by-Section Analysis)
The MDE NPRM proposed to require operable parts to be operable with one hand and not require tight grasping, pinching, or twisting of the wrist. There were no public comments on this...
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
R403.3 Height
R403.3 Height. Operable parts shall be placed within one or more of the reach ranges specified in R406.
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles.
-
R403.2 Clear Space
R403.2 Clear Space. A clear space complying with R404 shall be provided at operable parts.
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4. Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches...
