[See subsections ...]
Search Results "Side Transfer Surface"
Commonly Searched Documents
- 
    
  
  11B-902 Dining surfaces and work surfaces
  
 - 
    
  
  11B-226 Dining surfaces and work surfaces
  
[See subsections ...]
 - Miracle Sealant Slip-Resistant Flooring Treatment
 - 
    
  
  1009.4.5 Grab Bars
  
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
 - 
    
  
  11B-1009.4.5 Grab bars
  
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
 - 
    
  
  Part I. A Longitudinal Study of Trail Surfaces Final Report
  
A Longitudinal Study of Trail Surfaces Final Report...
 - 
    
  
  Part II. National Trail Surface Survey Final Report
  
National Trail Surface Survey Final Report...
 - 
    
  
  Side reach (Section-by-Section Analysis)
  
Side reach. The 1991 Standards at section 4.2.6 establish a maximum side-reach height of 54 inches. The 2010 Standards at section 308.3.1 reduce that maximum height to 48 inches....
 - 
    
  
  Side reach (Section-by-Section Analysis)
  
Side reach. The 1991 Standards at section 4.2.6 establish a maximum side-reach height of 54 inches. The 2010 Standards at section 308.3 reduce that maximum height to 48 inches....
 - 
    
  
  Installation of Test Surfaces
  
Installation of Test Surfaces In accordance with standard EWF design and construction practice (Figure 2), the full depth surfaces were prepared to the same requirements needed for permanent...
 - 
    
  
  11B-1008.3.2.4 Contrasting stripe
  
Striping complying with Section 11B-504.4.1 shall be provided at each transfer step. FIGURE 11B-1008.3.2 TRANSFER STEPS...
 - Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
 - 
    
  
  Installation of Aggregate Surfaces at Bradford Woods
  
Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
 - 
    
  
  11B-405.3 Cross slope
  
Cross slope is the slope of the surface perpendicular to the direction of travel....
 - 
    
  
  M305.2.2 Structural Strength
  
Transfer supports and their connections shall be capable of resisting vertical and horizontal forces of 250 pounds (1,112 N) applied at all points on the transfer support....
 - 
    
  
  Clear Floor or Ground Space: ADA Standard Section 1008.4.2
  
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
 - Envirobond is Self-Healing
 - Organic-Lock: The Self-Healing Organic Binder
 - Envirobond Deters Weeds
 - 
    
  
  1014.3 Floor
  
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
 - 
    
  
  11B-1002.6.3 Wheelchair storage space
  
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required transfer device and shall not overlap any required means of egress...
 - 
    
  
  11B-1002.6.3 Wheelchair storage space
  
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required transfer device and shall not overlap any required means of egress...
 - 
    
  
  11B-1002.6.3 Wheelchair storage space
  
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required transfer device and shall not overlap any required means of egress...
 - 
    
  
  A4.5.1 GENERAL
  
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....