The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm)...
Search Results "Seat Location"
Filters
Commonly Searched Documents
-
609.3 Spacing
-
Is vertical access required to all levels of a parking garage?
It depends. The Standards require that an accessible route connect each story in “multi-story” facilities but include certain exceptions based on the number of stories or the square...
-
F221.2 Wheelchair Spaces
Wheelchair spaces complying with F221.2 shall be provided in assembly areas with fixed seating....
-
221.2 Wheelchair Spaces
Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
221.2 Wheelchair Spaces
Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
6.10
6.10 Cinemark Future Construction Theaters that are built in conformity with the seating plans for Future Construction Theaters, or with the provisions of this Consent Order for Future...
-
F208.3.2 Residential Facilities
facilities containing residential dwelling units required to provide mobility features complying with 809.2 through 809.4, parking spaces provided in accordance with F208.2.3.1 shall be located...
-
208.3.2 Residential Facilities
facilities containing residential dwelling units required to provide mobility features complying with 809.2 through 809.4, parking spaces provided in accordance with 208.2.3.1 shall be located...
-
208.3.2 Residential Facilities
facilities containing residential dwelling units required to provide mobility features complying with 809.2 through 809.4, parking spaces provided in accordance with 208.2.3.1 shall be located...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
Designations: ADA Standard Section 216.2
Section 216.2 covers scoping requirements in the current ADA Standards for sign designations.
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
Section 35.151(g) Assembly Areas (Section-by-Section Analysis)
(when other seats are sold on a first-come-first-served basis only); reserved seating in sections or rows located in premium locations (e.g., behind home plate or near the home team's end...
-
§ 36.302(f)(8) Prevention of fraud in purchase of tickets for accessible seating
(8) Prevention of fraud in purchase of tickets for accessible seating....
-
Parking Spaces: ADA Standard Section 502
Section 502 covers the current ADA Standards for accessible parking spaces.
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm)...
-
Sec.36.308(b) New construction and alterations
The provision and location of wheelchair seating spaces in newly constructed or altered assembly areas shall be governed by the standards for new construction and alterations in subpart...
-
11B-608.5.2 Standard roll-in type shower compartments
and 27 inches (686 mm) maximum from the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor, with their centerline at 39 inches...
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
§ 35.138(i)(1)
Individuals with disabilities and their companions shall be permitted to purchase the same maximum number of tickets for an event per sales transaction as other spectators seeking to purchase seats...