Design* Minimum Accessible of Each Design 1‒4 1 5‒8 2 9‒15 3 0ver 15 3 (+ 20% of total above 15) *e.g. belt length...
Search Results "Hose Length"
-
Check-Out Aisles [7.3]
-
A4.17.3 Size and Arrangement
Since the stall is primarily intended for use by persons using canes, crutches and walkers, rather than wheelchairs, the length of the stall could be conventional....
-
Suggested accessibility guidelines for exterior concrete surfaces
The deviation from slope or plane of formed surfaces over 10 feet (3 m) is ± 0.3% of length. This is approximately 3/8 inch in 10 feet (10 mm in 3 m)....
-
Positioning Supports Considered
., length, height above the patient support surface, location) to ensure their effectiveness?...
-
11B-403.5.1 Clear width
The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that...
-
11B-205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309....
-
11B-403.5.1 Clear width
Exceptions: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated...
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
The 3-inch maximum gap applies to two sides of medical diagnostic equipment with a rectangular shape, the long length (width) and the short length (depth), where the transfer surface is...
-
4. What factors should a public school district consider in determining what auxiliary aids or services are necessary to afford qualified students with disabilities an equal opportunity to participate in, and enjoy the benefits of, the public school’s services, programs, or activities?
determination of what auxiliary aids or services will provide effective communication must be made on a case‐by‐case basis, considering the communication used by the student, the nature, length...
-
Test Courses & Surfaces
This “access route” was 574.2 ft (175.0 m) in length, and included two 137 ft (41.8 m) sections with grades of 4% to 5% (one uphill, one downhill), and two 30-foot (9.1 m) ramps with grades...
-
Symmons Ultra-Sense Battery Powered Sensor Faucet S-6060
and 3 hole mounting hardware with 4 inch center deck plate Vandal resistant aerator, 1.5 gpm (5.7 L/min) flow rate Water supply in-line strainer / adapter 20 inch braided supply hose...
-
Trimco 1500 Series Hospital Latch
A fusible link with a low melting point provides lockup of the corridor side push pad in the event of a fire, preventing ceiling debris or fire-hose pressure from accidentally releasing...
-
Magnuson Group WH Hanger Style Wall Rack
Wall mounted coat racks are custom built to your length requirements....
-
Rockwood Manufacturing Company BFRC24 Vertical Rod Cover
It is available in 12" and 24" lengths. Mounting is with sheet metal screws....
-
Rockwood Manufacturing Vertical Rod Cover BFRC12
It is available in 12" and 24" lengths. Mounting is with sheet metal screws....
-
Mockett DH401-BB Slim Barrel Door Handle Back to Back
Size: 400mm (15-3/4") length, 300mm (11-13/16") center to center and 60mm (2-3/8") projection. Colors: Nickel with Black, Chestnut Brown or Chocolate Brown leather....
-
DORMA ED700 Low-Energy Swing Door Operator
Wide variety of application possibilities Extruded aluminum covers in custom lengths are available to match aesthetically with the door frame....
-
Supergrit Safety Treads
FEATURES: Extruded aluminum base-abrasive filler Lengths to order, up to 12'-0" (3.66 m) max. in one piece Non-combustible High content of aluminum oxide abrasive 12 standard...
-
General Exceptions in FSTAG
All of the unaffected technical requirements must be met for the full length of the trail, including the section where the condition for an exception prohibits full compliance with the particular...
-
Mockett TLEL3 Electrically Driven Adjustable Table Legs
Multiple sizes available, allowing for max tabletop depth up to 30" and up to 72" length....
-
Inpro Corporation IPC® HR9 Northern Hardwoods® Real Wood Handrail
no finish screws to hide Key Specifications 1-3/8" (35mm) height Red oak, maple and poplar 1-1/2" (38mm) grip Manufactured in 8' - 16' (2.44m - 4.88m) standard lengths...
-
Grainger Anti Ligature Grab Bar, SS, 30 In
Technical Specs Item: Antiligature Grab Bar Material: Stainless Steel Finish: Stainless Steel Color: Silver Length (In.): 30 Height...
-
ASI Storage Solutions Competitor Locker
STANDARD FEATURES: 2 mil powder coated in any of 15 designer colors Stainless steel recessed handle for safety 16 gauge bottom shelf for durability Continuous full-length staked...
