For purposes of this section, “transitory” is defined as lasting or expected to last six months or less....
Search Results "Expected Maximum Flight Duration"
-
§ 36.105(f)(2)
-
§ 35.108(f)(2)
For purposes of this section, “transitory” is defined as lasting or expected to last six months or less....
-
Savaria ORION Limited Use/Limited Application Elevator Video
The Orion elevator is designed with features you would expect in a high-rise elevator but built for commercial low-rise buildings. ...
-
Patriot Portable Lift by Aqua Creek Products
The Patriot lift provides the mobility and maneuverability so desired by pool owners and patrons with the reliability and quality expected of an Aqua Creek pool lift. ...
-
§382.117(f)
direct threat to the health or safety of others, whether it would cause a significant disruption of cabin service, whether it would be prohibited from entering a foreign country that is the flight's...
-
B. Information about the Aircraft
[Secs. 382.21 and 382.45] When feasible, you should provide information pertaining to a specific aircraft to be used for a specific flight....
-
Can the carrier limit the amount of money they pay me for this claim...as they currently may for domestic baggage claims?
On claims involving damage to assistive devices on domestic flights, carriers may not invoke the liability limit applicable to baggage claims....
-
Ask Questions and Provide Instructions
Keep in mind that carriers might provide such optional accommodations on their “mainline” flights only, not on the flights operated by their smaller code-share affiliates....
-
382.117 Must carriers permit passengers with a disability to travel with service animals?
If a flight segment is scheduled to take eight hours or more, the carrier may require documentation that the service animal will not need to relieve itself or can do so in a way that will...
-
Accessible Routes: ADA Standard Section 1007.2
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
Elevated: ADA Standard Section 1008.2.5.2
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
Platform to Runway Clearance: ADA Standard Section 410.4
Section 410.4 covers the current ADA Standards for the required clearance between the platform and any runway landing.
-
Platform to Hoistway Clearance: ADA Standard Section 409.4.3
Section 409.4.2 covers the ADA Standards for the required clearance between the car platform and the hoistway landing in private residence elevators.
-
Stroke Thickness: ADA Standard Section 703.5.7
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
